Particular safety requirements for equipment to be connected to information and communication networks
Introduction: This document is applicable for products intended to be connected as communication terminal to an ICT network not covered by the scope of IEC 62368-1. It is to be used in conjunction with other product safety standards, examples of which are listed in Annex A. This document, in accordance with the 'principles of safety' given in the introduction of IEC 62368-1, covers the requirements and compliance criteria under three headings. Protection of equipment users from hazards in the equipment. The users are considered to be protected from hazards in the equipment if the equipment complies with a relevant safety standard, for example one of those listed in Annex A, but compliance with those standards is not part of this document. NOTE An equipment user could be an ordinary person or an instructed person. Protection of skilled persons or instructed persons working on an ICT network and other users of an ICT network, from hazardous conditions on an ICT network resulting from the connection of the equipment. Protection of equipment users from voltages on an ICT network. Upper limits for ICT networks signals have been defined. They include also telephone ringing signals which have been defined taking into account voltages commonly used in the different networks. The electrical hazard criteria have been chosen to be in accordance with IEC TS 60479 (all parts). Test levels used for the equipment take account of the possibility that overvoltages may occur on ICT networks. Special conside
Scope: This document applies to the interface of equipment designed and intended to be connected as a communication terminal to an information and communication technology (ICT) network termination. This document does not apply to: equipment covered by IEC 62368-1; and interfaces to other networks. NOTE 1 An example of ‘other networks’ is a dedicated Home and Building Electronic Systems/Building Automation and Control Systems HBES/BACS network covered by EN 50491-3. This document specifies the safety requirements of the interface to the ICT network only. NOTE 2 See Annex D. Requirements additional to those specified in this document may be necessary for equipment intended for operation while exposed, for example, to extremes of temperature, to excessive dust, moisture, or vibration, to flammable gases, to corrosive or explosive atmospheres, electro medical applications with physical connections to the patient. The following requirements are not covered by this document: functional safety of equipment; functional reliability of equipment; communication facilities with remote supply using hazardous voltage; protection of equipment connected to ICT networks from functional damage.
Contents:
- FOREWORD
- INTRODUCTION
- Scope