Monitoring and measuring systems used for data collection, aggregation and analysis – Part 1: Device requirements
Introduction: The use of electrical energy needs to be optimised worldwide to increase the efficient use of available energy sources, for enhanced competitiveness, and for reducing greenhouse gas emissions and other related environmental impacts. Efficient use of energy sources implies better energy management leading to a necessary improvement of energy performance, particularly in terms of efficiency, use and consumption. Aggregating energy data and ensuring its availability is key to providing an energy management system for organizations. Energy management systems described in documents such as ISO 50001, ISO 50002, ISO 50006, refer to the measurement of energy as an important improvement of energy performance. ISO 50001:2018 includes a requirement to "implement an energy data collection plan […] and its measurement and monitoring equipment" to enable the organization to demonstrate energy performance improvement. Figure 1 shows the link between the ISO 50001:2018 PDCA model and the continuous improvement of this data collection. In the context of energy management, the Plan-Do-Check-Act (PDCA) approach (see Figure 1) can be outlined as follows: Plan: understand the context of the organization, establish an energy policy and an energy management team, consider actions to address risks and opportunities, conduct an energy review, identify significant energy uses (SEUs) and establish energy performance indicators (EnPIs), energy baseline(s) (EnBs), objectives and energy targets, and acti
Scope: This part of IEC 62974 specifies product and performance requirements for devices that fall under the heading of "monitoring and measuring systems used for data collection, aggregation and analysis", for industrial, commercial, and similar use rated below or equal to 1 kV AC and 1,5 kV DC. These devices are fixed and are intended to be used indoors as panel-mounted devices, or as modular devices fixed on a DIN rail, or as housing devices fixed on a DIN rail, or as devices fixed by other means inside a cabinet. These devices are used to upload or download information (energy measured on loads, power metering and monitoring data, temperature information, etc.), mainly for energy efficiency purposes. These devices are known as energy servers (ESE), energy data loggers (EDL), data gateways (DGW) and I/O data concentrators (IODC) and are grouped together under the family name of Data Management Devices (DMD). NOTE These systems are embedded or can be connected to a software application capable of consolidating data and delivering automatic analysis. Automatic analysis can include calculation of energy baselines or energy performance indicators as requested for the energy management system required by ISO 50001 or can be used during energy audits as defined in ISO 50002, or can be used in electrical energy efficiency management systems (EEMS) for monitoring an installation complying with IEC 60364-8-1 for the efficient use of electricity. These devices can also be used for certification according to labels such as LEED, BREEAM, HQE, etc. This document does not cover: devices used only in the consumer market (living quarters) or household; devices used in the smart metering infrastructure (e.g. smart meters); devices used in the smart grid infrastructure; devices used as IT servers in the information technology business; power metering and monitoring devices (PMD); I/O data concentrators already covered by a specific product standard; communication protocols and interoperability; power quality instruments (PQI); software used for the data collection and analysis of the power quality for the supply side.
Contents:
- FOREWORD
- INTRODUCTION
- Scope