IEC 62977-3-4-2023 PDF

IEC 62977-3-4-2023 PDF

Electronic displays-Part 3-4: Evaluation of optical performances-High dynamic range displays

$186.00 $371.99 -50%
Product Code: IEC 62977-3-4
Stock In Stock
Edition: 1.0
Published: 03/2023
Number of Pages: 48
File Size: 1 file, 1 Byte

Available Options

Product Description

Electronic displays – Part 3-4: Evaluation of optical performances – High dynamic range displays

Introduction: High dynamic range (HDR) systems enable more natural images that contain wider variations in brightness. For the wider dynamic range, newly designed electro-optical transfer function (EOTF) replaces the BT.1886 function of standard dynamic range (SDR) HDTV. High dynamic range (HDR) systems utilize non-linear signal encoding that enables reproduction over a wider range of light levels, from subtle grey differences at very low luminance levels up to very bright highlights. This very wide range of light levels occurs in both natural as well as synthetic imagery. In particular, in order to render the native image according to the intent of the content creator, signal codewords of SMPTE ST 2084 [2]1 HDR EOTF, also known as the perceptual quantizer (PQ), are mapped to absolute luminance values within the mastering peak luminance as specified in metadata of the HDR content, versus an SDR signal level which indicates relative brightness according to the display luminance. In this case, tone mapping would be necessary when the display luminance cannot make the darker and the brighter luminance because HDR content preserves details in the darkest and brightest areas of a picture that are lost when using SDR standards (see 3.1.4) [20] such as Recommendation ITU-R BT.709 [12]. The tone mapping curve can depend upon the display manufacturer. This document intends to describe the measurement and evaluation of the optical performance of HDR displays as a reference for forthcoming standards

Scope: This part of IEC 62977 specifies the standard evaluation methods for determining the optical characteristics of HDR electronic display modules and systems. These methods apply to emissive and transmissive direct-view displays that render real 2D images on a flat panel or on a curved panel with a local radius of curvature larger than 1 500 mm. This document evaluates the optical characteristics of these displays under darkroom conditions. This document applies to the testing of display performance in response to HDR digital input signals that are absolute luminance encoded such as the HDR signal comprising RGB component values of Recommendation ITU-R BT.2020 colorimetry with SMPTE ST 2084 [2] PQ luminance encoding and SMPTE ST 2086 [3] metadata. NOTE A flat panel or flat panel display is a display with a planar surface that emits light from the surface. The display can consist of light valves modulating a backlight or be self-luminous. Emissive/transmissive/reflective hybrid displays can be non-planar panels or non-planar panel displays.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62977-3-4-2023 PDF

IEC 62977-3-4-2023 PDF

$186.00 $371.99