IEC 63257-2026 PDF

IEC 63257-2026 PDF

Power line communication for DC shutdown equipment - Communication signal, physical layer

$211.22 $422.43 -50%
Product Code: IEC 63257
Stock In Stock
Edition: 1.0
Published: 05/2026
Number of Pages: 60
File Size: 1 file

Available Options

Product Description

Power line communication for DC shutdown equipment - Communication signal, physical layer

Introduction: This document defines the communication requirements for reducing the output voltage of the DC cables that leave a PV array. This output voltage reduction function can support emergency responders during firefighting operations. For this function, communication is necessary from the inverter / initiator to the PV-modules. Today there are many ways to accomplish this communication task and it is possible to use either wired or wireless solutions. With wireless solutions issues with range and/or communication robustness may occur. Although robustness can be tackled with protocols and modulation schemes, it is sometimes hard to get the necessary range due to physical limitations and normative regulations. With wired communication the need of an additional wire which has to be installed along with the DC power cabling is often a problem. A solution for this is to use power line communication so that the DC power and the information signal are on the same cable and therefore installation requirements and costs are low because the necessity of laying an extra communication cable is eliminated. This document has been developed to set rules for such a power line communication.

Scope: This document applies to photovoltaic (PV) system components and communication networks supporting the communication of the DC shutdown equipment using power line communication. This document defines how to propagate the operational state of the entire PV system (normal / shutdown) to the individual power production components comprising the PV system. The document also describes requirements and constraints associated with power line communication networks that are used to support this application. NOTE 1 It is possible to have systems communicating in different ways to the method covered in this document. E.g., in systems where all components of the PLC communication are from the same manufacturer. For those systems this document does not apply. NOTE 2 Not included in the scope of this document are requirements for DC shutdown initiator mechanism, disconnection and de-energization. NOTE 3 This document does not address whether DC shutdown is required or not. NOTE 4 EMC requirements are not included in this document.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 63257-2026 PDF

IEC 63257-2026 PDF

$211.22 $422.43