IEC 63275-2-2022 PDF

IEC 63275-2-2022 PDF

Semiconductor devices-Reliability test method for silicon carbide discrete metal-oxide semiconductor field effect transistors-Part 2: Test method for bipolar degradation due to body diode operation

$25.22 $50.44 -50%
Product Code: IEC 63275-2
Stock In Stock
Edition: 1.0
Published: 05/2022
Number of Pages: 24
File Size: 1 file, 899 Bytes

Available Options

Product Description

Semiconductor devices – Reliability test method for silicon carbide discrete metal-oxide semiconductor field effect transistors – Part 2: Test method for bipolar degradation due to body diode operation

Introduction: Silicon carbide (SiC) is widely used as a semiconductor material for next-generation power semiconductor devices. SiC, as compared with silicon (Si), has superior physical properties such as a higher breakdown electric field, higher thermal conductivity, lower carrier generation rate, higher saturated electron drift velocity, and lower intrinsic carrier concentration. These attributes realize SiC-based power semiconductor devices with faster switching speeds, lower losses, higher blocking voltages, and higher temperature operation relative to standard Si based power semiconductor devices. Possible reliability issues include on-state voltage drop change, on-state resistance increase and reverse drain voltage change of metal-oxide semiconductor field effect transistors due to a current flowing through the body diode. This occurs because the body diode current causes the formation of stacking faults that expand within the drift region of the MOSFET and impede current flow within the area that they occupy. This increases the on-state resistance and degrades the operation of the power electronics system. This effect will only occur if the active device volume contains basal plane dislocations (BPDs), and there is electron-hole pair (EHP) recombination such as occurs during forward biasing of the body diode of the SiC MOSFET. That means some of the devices may show parameter drift, others will not drift. Therefore, it is indispensable to establish an International Standard with reg

Scope: This part of IEC 63275 gives the test method and a procedure using this method to evaluate the on-state voltage change, on-state resistance change and reverse drain voltage change of silicon carbide (SiC) power MOSFET devices due to body diode operation. This test is not generally requested for Si power transistors.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 63275-2-2022 PDF

IEC 63275-2-2022 PDF

$25.22 $50.44