IEC 63341-2-2025 PDF

IEC 63341-2-2025 PDF

Railway applications - Hydrogen and fuel cell systems for rolling stock - Part 2: Hydrogen fuel system

$239.59 $479.18 -50%
Product Code: IEC 63341-2
Stock In Stock
Edition: 1.0
Published: 11/2025
Number of Pages: 154
File Size: 1 file, 4.9 MB

Available Options

Product Description

Railway applications - Hydrogen and fuel cell systems for rolling stock - Part 2: Hydrogen fuel system

Introduction: This document considers general requirements for gaseous hydrogen fuel system installed on-board rail vehicles. Design and performance requirements for fuel cell power systems are specified in IEC 63341-1. Performance test methods for fuel cell power systems are specified in IEC 63341-3. ISO/TC 197, Hydrogen technologies, ISO/TC 22/SC 37, Electrically propelled vehicles, and SAE Fuel Cell Standards Committee carry out standardization activities on hydrogen storage technologies such as: ISO 17268, Gaseous hydrogen land vehicle refuelling connection devices ISO 19881, Gaseous hydrogen – Land vehicle fuel containers ISO 19882, Gaseous hydrogen – Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers ISO 19887-1, Gaseous Hydrogen – Fuel system components for hydrogen fuelled vehicles – Part 1: Land vehicles ISO 23273, Fuel cell road vehicles – Safety specifications – Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen These documents are mainly oriented to road vehicle applications. Therefore, this document is intended to augment them by adding specific requirements for the railway applications. The hierarchy of standards is shown in Figure 1. The list is not exhaustive. Figure 1 – Hierarchy of standards related to IEC 63341

Scope: This part of IEC 63341 applies to on-board hydrogen fuel systems (HFSs) used to supply the fuel cells for the traction power and the auxiliaries supply of railway vehicles (such as hybrid vehicles as defined in IEC 62864-1). NOTE This document can also be used for applications with hydrogen internal combustion engines. This document applies to hydrogen storage in gaseous form. Other means of storage (such as liquid, liquid cryo-compressed, metal hydrides) are not covered in this document. This document applies to any rolling stock type (e.g. light rail vehicles, tramways, streetcars, metros, commuter trains, regional trains, high speed trains, locomotives). This document defines: the scope of supply of hydrogen fuel system and the description of the interfaces with sub-systems internal and external to the rolling stock such as fuel cell power system, fuelling station systems; the environmental constraints; the design requirements to support HFS compliance with railway applications; the safety and reliability requirements to design and install the HFS for railway applications; the marking and labelling requirements; the requirements related to storage, transportation, installation and maintenance; the validation (type, routine and investigation tests) requirements. This document addresses the on-board mechanical, fluidic and electrical interfaces between the on-board hydrogen fuel system and fuelling station. The fuelling station, fuelling protocol and communication for the fuelling protocol are not in the scope of this document.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 63341-2-2025 PDF

IEC 63341-2-2025 PDF

$239.59 $479.18