IEC/IEEE 61886-1-2021 PDF

IEC/IEEE 61886-1-2021 PDF

Subsea equipment-Part 1: Power connectors, penetrators and jumper assemblies with rated voltage from 3 kV (Umax = 3,6 kV) to 30 kV (Umax = 36 kV)

$255.36 $510.71 -50%
Product Code: IEC/IEEE 61886-1
Stock In Stock
Edition: 1.0
Published: 04/2021
Number of Pages: 100
File Size: 1 file, 3 Bytes

Available Options

Product Description

Subsea equipment – Part 1: Power connectors, penetrators and jumper assemblies with rated voltage from 3 kV (Umax = 3,6 kV) to 30 kV (Umax = 36 kV)

Introduction: Within the oil and gas industry there is an increasing use of electrical power equipment on the seabed. Subsea processing activities like compression and pumping require increasingly higher amount of electrical power. Power generation, whether onshore or offshore, requires development of equipment both for subsea transmission and distribution. Current standards for topside equipment do not include requirements related to equipment installed below the sea surface. Project and client specific specifications are used for both design and testing. The fact that equipment is qualified on a project basis, rather than to common standards, has several drawbacks: similar equipment is qualified to different type and routine test specifications; equipment has to be re-qualified for new projects that have slightly different requirements, for instance increased water depth; project specific ratings leading to higher number of equipment versions than strictly required. All these issues lead to increased costs and schedule (for type testing), and also increased risk for failure (several type test programs are performed on a high number of various designs). By standardizing tests and implement continuous improvement on fewer products, this risk will be reduced in the long term. The SEPS JIP (Subsea Electrical Power Standardization Joint Industry Project) was established in 2010 by seven oil and gas companies, with the aim to develop common operator standards for subsea electrical power equipm

Scope: This document is applicable to single and three-phase wet-mateable and dry-mateable AC connectors, penetrators and jumper assemblies with rated voltages from 3 kV (Umax = 3,6 kV) to 30 kV (Umax = 36 kV). This document relates to the requirements and tests for products in the "as manufactured and supplied" condition. This document is not applicable to requirements and tests for products that have been subsequently installed, deployed or retrieved.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC/IEEE 61886-1-2021 PDF

IEC/IEEE 61886-1-2021 PDF

$255.36 $510.71