IEC/IEEE 62582-4-2022 PDF

IEC/IEEE 62582-4-2022 PDF

Nuclear power plants-Instrumentation and control important to safety-Electrical equipment condition monitoring methods-Part 4: Oxidation induction techniques

$132.41 $264.81 -50%
Product Code: IEC/IEEE 62582-4
Stock In Stock
Edition: 2.0
Published: 11/2022
Number of Pages: 64
File Size: 1 file, 2 Bytes

Available Options

Product Description

Nuclear power plants – Instrumentation and control important to safety – Electrical equipment condition monitoring methods – Part 4: Oxidation induction techniques

Introduction: a) Technical background, main issues and organisation of this standard This part of IEC/IEEE 62582 specifically focuses on oxidation induction methods for condition monitoring for the management of ageing of electrical equipment installed in nuclear power plants. The methods are primarily suited to samples taken from materials that are polyolefin- based, but they can also be used for some materials based on ethylene-propylene polymers and for some ethylene vinyl acetate materials. This part 4 of IEC/IEEE 62582 is the fourth part of the IEC/IEEE 62582 series. IEC/IEEE 62582 series is issued with a joint logo which makes it applicable to the management of ageing of electrical equipment qualified to IEEE as well as IEC Standards. IEC/IEEE 60780-323 includes the concept and role that condition based qualification could be used in equipment qualification as an adjunct to qualified life. In equipment qualification, the condition of the equipment for which acceptable performance was demonstrated is the qualified condition. The qualified condition is the condition of equipment, prior to the start of a design basis event, for which the equipment was demonstrated to meet the design requirements for the specified service conditions. Significant research has been performed on condition monitoring techniques and the use of these techniques in equipment qualification as noted in NUREG/CR-6704, Vol. 2 (BNL-NUREG- 52610) JNES-SS-0903, 2009 and IAEA-TECDOC-1825:2017. It is intended that this

Scope: This part of IEC/IEEE 62582 specifies methods for condition monitoring of organic and polymeric materials in instrumentation and control systems using oxidation induction techniques in the detail necessary to produce accurate and reproducible measurements. It includes the requirements for sample preparation, the measurement system and conditions, and the reporting of the measurement results. The different parts of IEC/IEEE 62582 are measurement standards, primarily for use in the management of ageing in initial qualification and after installation. IEC/IEEE 62582-1 includes requirements for the application of the other parts of the IEC/IEEE 62582 series and some elements which are common to all methods. Information on the role of condition monitoring in the qualification of equipment important to safety is found in IEC/IEEE 60780-323.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC/IEEE 62582-4-2022 PDF

IEC/IEEE 62582-4-2022 PDF

$132.41 $264.81