IEC/IEEE 62582-6-2019 PDF

IEC/IEEE 62582-6-2019 PDF

Nuclear power plants ‒ Instrumentation and control important to safety ‒ Electrical equipment condition monitoring methods-Part 6: Insulation resistance

$100.88 $201.76 -50%
Product Code: IEC/IEEE 62582-6
Stock In Stock
Edition: 1.0
Published: 10/2019
Number of Pages: 52
File Size: 1 file, 2 Bytes

Available Options

Product Description

Nuclear power plants ‒ Instrumentation and control important to safety ‒ Electrical equipment condition monitoring methods – Part 6: Insulation resistance

Introduction: a) Technical background, main issues and organisation of the Standard This IEC/IEEE standard specifically focuses on insulation resistance measurement methods for monitoring of the dielectric condition of instrumentation and control cables during simulation of design basis events. This IEC/IEEE standard is the sixth part of the IEC/IEEE 62582-series. It contains detailed descriptions of condition monitoring based on insulation resistance measurements. The IEC/IEEE 62582-series of standards is issued with a joint logo which makes it applicable to management of ageing of electrical equipment qualified to IEEE as well as IEC Standards. For aged cables and accessories, the dielectric behaviour during simulated accident conditions generally indicates the condition of the cable during the simulated accident condition. Significant research has been performed on condition monitoring techniques and the use of these techniques in equipment qualification as noted in NUREG/CR-6704, vol.2 (BNL-NUREG-52610) and JNES-SS-0903, 2009. It is intended that this Standard be used by test laboratories, operators of nuclear power plants, systems evaluators and licensors. b) Situation of the current Standard in the structure of the IEC SC 45A standard series IEC/IEEE 62582-6 is the third level IEC SC 45A document tackling the specific issue of application and performance of insulation resistance measurements during simulated accident conditions in nuclear power plants. IEC/IEEE 62582-6 is to be read

Scope: This part of IEC/IEEE 62582 contains methods for condition monitoring of organic and polymeric materials in instrumentation and control cables using insulation resistance measurements in the detail necessary to produce accurate and reproducible results during simulated accident conditions. It includes the requirements for the measurement system and measurement procedure, and the reporting of the measurement results. NOTE Measurement of insulation resistance during simulated accident conditions with the aim of determining the lowest value during the accident in order to assess cable performance involves special requirements given in this document. Methods for measurement under stable (non-accident) conditions are available in other international standards, e.g. IEC 62631-3-3. The different parts of the IEC/IEEE 62582 series are measurement standards, primarily for use in the management of ageing in initial qualification and after installation. IEC/IEEE 62582- 1 includes requirements for the application of the other parts of the IEC/IEEE 62582 series and some elements which are common to all methods. Information on the role of condition monitoring in qualification of equipment important to safety is found in IEC/IEEE 60780-323.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC/IEEE 62582-6-2019 PDF

IEC/IEEE 62582-6-2019 PDF

$100.88 $201.76