IEC PAS 60539-1-1-2008 PDF

IEC PAS 60539-1-1-2008 PDF

Directly heated negative temperature coefficient thermistors-Part 1-1: Blank detail specification-Sensing application-Assessment level EZ

$50.44 $100.88 -50%
Product Code: IEC PAS 60539-1-1
Stock In Stock
Edition: 1.0
Published: 11/2008
Number of Pages: 16
File Size: 1 file, 879 Bytes

Available Options

Product Description

Directly heated negative temperature coefficient thermistors – Part 1-1: Blank detail specification – Sensing application – Assessment level EZ

Introduction: Blank detail specification A blank detail specification is a supplementary document to the generic specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements shall not be considered as being in accordance with IEC specifications nor shall they so be described. In the preparation of detail specifications, the content of 1.1 of the generic specification shall be taken into account. The numbers between brackets on the first page correspond to the following information which shall be inserted in the position indicated. Identification of the detail specification [1] The "International Electrotechnical Commission" or the National Standards Organization under whose authority the detail specification is drafted. [2] The IEC or National Standards number of the detail specification, date of issue and any further information required by the national system. [3] The number and issue number of the IEC or national generic specification. [4] The IEC number of the blank detail specification. Identification of the thermistor [5] A short description of the type of thermistor. [6] Information on typical construction (if applicable). NOTE When the thermistor is not designed for use on printed boards, this should clearly be stated in the detail specification in this position. [7] Outline drawing with main dimensions which are of importance for interchangeability and/or reference to the nati

Contents:

  • FOREWORD
  • INTRODUCTION
  • 1.10 Marking
  • 1.11 Ordering information
  • 1.12 Additional information (not for inspection purposes)
  • 1.13 Additional or increased severities or requirements to those specified in the

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC PAS 60539-1-1-2008 PDF

IEC PAS 60539-1-1-2008 PDF

$50.44 $100.88