IEC TR 60068-3-12-2022 PDF

IEC TR 60068-3-12-2022 PDF

Environmental testing-Part 3-12: Supporting documentation and guidance-Method to evaluate a possible lead-free solder reflow temperature profile

$163.93 $327.86 -50%
Product Code: IEC TR 60068-3-12
Stock In Stock
Edition: 3.0
Published: 10/2022
Number of Pages: 38
File Size: 1 file, 6 Bytes

Available Options

Product Description

Environmental testing – Part 3-12: Supporting documentation and guidance – Method to evaluate a possible lead-free solder reflow temperature profile

Introduction: The enormous variety of materials and components processed in SMT requires to consider their thermal properties, especially in reflow soldering. Since the second edition essentially limited its focus to lead-free soldering, there is a need to extend the contents in order to cover state of the art reflow soldering processes in general. Reflow soldering is a joining process using an additional metal (solder) with a liquidus temperature of 450 °C or less, in which solder paste or preforms are reflowed (see ISO 857-2:2005). Reflow soldering can be carried out with the technical processes of convection (air or nitrogen), condensation (vapour phase), radiation (e.g. infrared) or contact heat as well as with the help of low pressure (vacuum). The goal of a qualified reflow soldering process is to create high quality and reliable solder joints at product level. It is important to avoid soldering defects and damage to components and printed circuit board. In addition to the requirements for the formation of reliable solder joints, the specifications of the connection partners and the production requirements (temperatures, final layers, alloys, etc.), an adequate process control is an important factor. Primarily the resistance of the components and circuit boards to solder heat, as well as the specifications of the solder paste and/or flux, need to be considered. The sum of these physical limits is a theoretical temperature- time curve for a specific product (see DVS 2613). This docume

Scope: This part of IEC 60068, which is a Technical Report, describes the creation of temperature-time profiles (in specific envelope profiles) for reflow soldering of electronic assemblies, considering tolerances resulting from the accuracy of the measuring equipment, preparation method and specifications of the manufacturers of components, circuit boards, solder paste, etc.). The envelope profile given in this document does not represent a temperature-time profile for qualification but defines the reflow process window for the soldering of electronic assemblies. Qualification profiles can be found, for example, in IEC 60068-2-58 for resistance to soldering heat, or in IEC 60749-20, IEC 61760-4 and IPC/JEDEC J-STD-020E for moisture sensitivity classification of components.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 60068-3-12-2022 PDF

IEC TR 60068-3-12-2022 PDF

$163.93 $327.86