Effects of current on human beings and livestock – Part 5: Touch voltage threshold values for physiological effects
Introduction: This technical report provides a methodology for estimating voltage thresholds which are intended to give guidance to IEC technical committees on the selection and application of voltage limits with regard to protection against electric shock. Technical committees may use this methodology to recalculate proposed voltage thresholds or to determine new voltage threshold values based on different pathways, other current threshold values, different alternating current frequencies, other skin capacitances values, etc. To estimate the type and severity of physiological effects that might be caused by electricity, the magnitude and pathway of current through a person’s body needs to be determined. However, from an equipment design point of view, it is advantageous to be able to predict whether unwanted physiological effects are possible or probable, given only information about voltage levels on accessible conductive surfaces. If the maximum available voltage is sufficiently low under the expected circumstances to be unable to cause enough touch current to cause unwanted physiological effects, then the safeguards normally required to avoid the occurrence of these physiological effects may be reduced or eliminated. Voltages below critical levels that are unlikely to be hazardous in this respect have normally been called extra-low voltage (ELV). Based on this information technical committees may wish to review their defined values of extra-low voltage. The objective of this technical
Scope: IEC/TR 60479-5, which is a technical report, provides touch voltage-duration combination thresholds based on analysis of information concerning body impedances and current thresholds of physiological effects, as given in IEC/TS 60479-1. Such threshold combinations relate to specific environmental and contact conditions that determine body impedance for particular current pathways. This technical report considers only (i) 50/60 Hz sinusoidal alternating voltage having no other frequency components and no significant direct voltage component, and (ii) direct voltage with no significant alternating component. This technical report provides thresholds as a result of calculations based on values from IEC/TS 60479-1, with uncertainties. Therefore thresholds proposed in this report also correspond to values with uncertainties. This technical report does not consider immersion of body parts and medical application. Touch voltage-duration combination thresholds are for use by technical committees as guidance for the determination of limits for touch voltage and touch voltage durations in various environmental situations. Determination of limits needs to be based on risk assessment. Factors that are part of risk assessment include voltage threshold values (taking into account contact area, skin moisture condition, body current pathway) provided by this technical report, as well as other factors not covered such as: reduction of the likelihood of contact (by obstacles, barriers, warnings, placing out of reach, training, etc.); or reduction of touch voltage compared to the fault voltage (such as by equipotential bonding); or additional resistance in series with the human body (such as gloves, shoes, carpet, etc.).
Contents:
- FOREWORD
- INTRODUCTION
- Scope