Medical electrical equipment – Diagnostic X-rays – Part 2: Guidance and rationale on quality equivalent filtration and permanent filtration
Introduction: This document supports IEC 60522-1. The purpose of this document is to identify those items which are substantially modified in IEC 60522-1 versus the 2nd Edition of IEC 60522, published in 1999, as well as to elucidate the technical analyses which led to the many new rationales and new approaches for the determination of the QUALITY EQUIVALENT FILTRATION (abbreviated, where appropriate, like in figures and tables, by “QEF”). The review of IEC 60522:1999 pointed to several technical issues, as discussed in Clause 4. These issues have been investigated with the help of a RADIATION BEAM HALF-VALUE LAYER simulation tool, based on the SRS-78 code (see [2]1) and the NIST X-ray mass ATTENUATION COEFFICIENTS [4]. On this basis, HALF-VALUE LAYER values can reliably be obtained (see [3]). (For further confirmation of the tool’s accuracy, the tool has been validated against laboratory measurements, with good results – see 9.2). With this tool, the properties of the RADIATION BEAM can be analysed as a function of the TARGET material, TARGET ANGLE, HIGH VOLTAGE and FILTER material. It appears then that the following statements in the IEC 60522:1999 are not always true: 1) on the concept of adding individual values of QEF to obtain the total QEF value, i.e. the concept of “additivity” (see 5.5 for details); 2) on the relevance of the K-edge for RADIOGRAPHY, and 3) on the method for determining the PERMANENT FILTRATION on the basis of a composite sample of the materials. Further, it appear
Scope: This document provides guidance on quality equivalent filtration and permanent filtration with regards to the requirements of IEC 60522-1 and its modifications versus IEC 60522:1999.
Contents:
- FOREWORD
- INTRODUCTION
- Scope