IEC TR 60695-2-16-2025 PDF

IEC TR 60695-2-16-2025 PDF

Fire hazard testing - Part 2-16: Glowing/hot-wire based test methods - Summary of the round robin tests related to the use of pyrometer for glow-wire temperature measurements according to IEC 60695-2-10

$271.12 $542.23 -50%
Product Code: IEC TR 60695-2-16
Stock In Stock
Edition: 1.0
Published: 09/2025
Number of Pages: 128
File Size: 1 file, 16 Bytes

Available Options

Product Description

Fire hazard testing - Part 2-16: Glowing/hot-wire based test methods - Summary of the round robin tests related to the use of pyrometer for glow-wire temperature measurements according to IEC 60695-2-10

Introduction: Since over the recent years new technologies related to the measurement of temperature are increasing on the market, IEC Technical Committee 89 "Fire hazard testing" has decided to investigate the possibility to improve the temperature measurement system described in the IEC 60695-2-10. Therefore, during its 2019 plenary meeting, the IEC TC 89 created the Ad-Hoc Group 14 "Glow- wire testing; Optimization of the temperature measuring system" with the task to investigate possible variation factors affecting the current temperature measurement system described in IEC 60695-2-10 and consequentially to possibly develop a proposal for improvement of IEC 60695-2-10. Between 2019 and 2023 the Ad-Hoc Group activities focused on: Evaluation of the possible displacement of the thermocouple within the glow-wire pocket hole; Evaluation of the comparability of temperature measurements between the thermocouple and the pyrometer During the investigation of the above-mentioned items, the Ad-Hoc Group 14 performed a pre- round robin test, where the participation was limited to the Ad-Hoc Group 14 members, and two round robin tests, where the participation was open to all National Committee experts. The outcome of the work of the Ad-Hoc Group resulted in a proposal for a new Annex to IEC 60695-2-10, describing the minimum technical characteristics and usage conditions for the pyrometer, as alternative temperature measurement system to the thermocouple. The IEC has decided to develop this Techni

Scope: This part of IEC 60695-2 specifies the results of the round robin tests related to the use of the pyrometer, for the measurement of the glow-wire temperature, according to IEC 60695-2-10. This Technical Report summarize the objectives and the results of a pre-round robin test and two round robin tests, performed by the IEC: "Glow-wire testing: Optimization of the temperature measuring system". The outcome of the work conducted by the IEC resulted in a proposal for a new Annex in IEC 60695-2-10, describing the minimum technical characteristics and usage conditions for the pyrometer, as an alternative temperature measurement instrument to the thermocouple.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 60695-2-16-2025 PDF

IEC TR 60695-2-16-2025 PDF

$271.12 $542.23