IEC TR 61189-5-506-2019 PDF

IEC TR 61189-5-506-2019 PDF

Test methods for electrical materials, printed boards and other interconnection structures and assemblies-Part 5-506: General test methods for materials and assemblies-An intercomparison evaluation to implement the use of fine-pitch test structures for surface insulation resistance (SIR) testing of solder fluxes in accordance with IEC 61189-5-501

$100.88 $201.76 -50%
Product Code: IEC TR 61189-5-506
Stock In Stock
Edition: 1.0
Published: 06/2019
Number of Pages: 28
File Size: 1 file, 5 Bytes

Available Options

Product Description

Test methods for electrical materials, printed boards and other interconnection structures and assemblies – Part 5-506: General test methods for materials and assemblies – An intercomparison evaluation to implement the use of fine-pitch test structures for surface insulation resistance (SIR) testing of solder fluxes in accordance with IEC 61189-5-501

Introduction: This document addresses the development of IEC 61189-5-501 and the introduction of a fine- pitch test pattern. The introduction of this pattern is needed to meet the need for IEC 61189- 5-501 to reflect current assembly technology. This document describes an intercomparison that tests a new test pattern and benchmarks it to existing test patterns. The work validates the introduction of the new fine-pitch test pattern. It is well known that structures at fine pitches with flux residues are more susceptible to corrosion issues and electrochemical migration (ECM) problems. Characterization of flux residues in terms of ECM are commonly characterized using SIR testing. A key parameter of the SIR test is the comb pattern used and gap between the electrodes. The current B24 and B25 with their 500-µm and 318-µm gap patterns are not representative of fine pitches. It has been proposed to use a 200-µm gap pattern, and this document describes an intercomparison that validates the introduction of the 200-µm gap pattern. This document describes an exercise that used a new test board that included the B24 and B25 patterns with an additional 200-µm pattern, with each pattern duplicated, giving six patterns in all on each test board. This work was motivated by an update to IEC 61189-5-501. A protocol for the testing was developed that took a standardised test rosin flux and defined the flux loading and thermal conditioning. Seven laboratories took part from five countries. The test boards we

Scope: This Technical Report is an intercomparison supporting the development of IEC 61189-5-501 in relation to the SIR method. This document sets out to validate the introduction of a new 200-µm gap SIR pattern, and was benched marked against existing SIR gap patterns of 318 µm and 500 µm.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 61189-5-506-2019 PDF

IEC TR 61189-5-506-2019 PDF

$100.88 $201.76