Fibre optic communication system design guidelines – Part 14: Determination of the uncertainties of attenuation measurements in fibre plants
Introduction: The determination of the uncertainty of every measurement is a key activity, which should be performed by applying dedicated methods as extensively presented in reference documents such as ISO/IEC Guide 98-3:2008, Guide to the uncertainty of measurement (GUM). This document shows a practical application of these methods for the determination of the measurement uncertainty of the attenuation of fibre optic cabling using optical light sources and power meters as defined in IEC 61280-4-1 and IEC 61280-4-2. Reference documents such as ISO/IEC Guide 98-3, Guide to the uncertainty of measurement (GUM), detail methods for the determination of the uncertainty of a measurement. This document shows a practical application of these methods for the determination of the uncertainty in attenuation measurements of fibre optic cabling as defined in IEC 61280-4-1, IEC 61280-4-2, and IEC 61280-4-3, using optical light sources and power meters or OTDRs, with the exception of multimode OTDRs. It includes the review of all contributing factors to uncertainty (such as launch conditions, spectral width, stability of source, power meter polarization, resolution, linearity, and quality of test cord connectors) to determine the overall measurement uncertainty. This part of IEC 61282 applies to the measurement of single-mode or multimode fibres without restrictions to the fibre parameters, including mode field diameter, core diameter, and NA. However, numerical values given in Clause C.2 and typical va
Scope: This part of IEC 61282, which is a Technical Report, establishes a detailed analysis and calculations of the uncertainties related to the measurement of the attenuation of both multimode and single-mode optical fibre cabling, using optical light sources and power meters. It also includes simplified analysis and calculation of the uncertainties related to the measurement of the attenuation of single-mode optical fibre cabling using OTDRs.
Contents:
- FOREWORD
- INTRODUCTION
- Scope