IEC TR 61850-90-12-2020 PDF

IEC TR 61850-90-12-2020 PDF

Communication networks and systems for power utility automation-Part 90-12: Wide area network engineering guidelines

$299.49 $598.97 -50%
Product Code: IEC TR 61850-90-12
Stock In Stock
Edition: 2.0
Published: 07/2020
Number of Pages: 264
File Size: 1 file, 28 Bytes

Available Options

Product Description

Communication networks and systems for power utility automation – Part 90-12: Wide area network engineering guidelines

Introduction: Utilities use data networks to interconnect equipment between their premises, over distances from under a kilometre to thousands of kilometres, called a "Wide Area Network" or WAN. WANs encompass communication means of different natures (optical, radio, power line carrier, copper, etc.), with a variety of topologies (rings, trees, meshes, etc.), using different protocols (SDH/SONET, Ethernet, IP, MPLS, etc.), medium sharing (packet switching, time division multiplex, etc.) and for different applications (teleprotection, SCADA, voice, video, etc.). This contrasts with substation automation networks as described in the LAN Engineering Guidelines (IEC TR 61850-90-4), which are based on one technology (switched Ethernet), make extensive use of Layer 2 multicast (GOOSE, SMV, PTP, etc.) and use Layer 3 communication (MMS, FTP, etc.), typically without routers within the substation. The IEC 61850 series sets up numerous requirements on the network but does not state how to achieve them: IEC 61850-5 specifies the basic requirements for data networks used in Power Utility Automation networks; IEC 61850-7 focuses on data modelling, leaving out physical interconnection details; IEC 61850-8-1 and IEC 61850-9-2 specify interoperable communication within substations; IEC TR 61850-90-1 describes substation-to-substation traffic, specifies the requirements for communication, defines object models for substation-to-substation teleprotection, models the gateway and the tunneller, but leaves th

Scope: This part of IEC 61850, which is a Technical Report, is intended for an audience familiar with electrical power automation based on IEC 61850 and related power system management, and particularly for data network engineers and system integrators. It is intended to help them to understand the technologies, configure a wide area network, define requirements, write specifications, select components, and conduct tests. This document provides definitions, guidelines, and recommendations for the engineering of WANs, in particular for protection, control and monitoring based on IEC 61850 and related standards. This document addresses substation-to-substation communication, substation-to-control centre, and control centre-to-control centre communication. In particular, this document addresses the most critical aspects of IEC 61850 such as protection related data transmission via GOOSE and SMVs, and the multicast transfer of large volumes of synchrophasor data. The document addresses issues such as topology, redundancy, traffic latency and quality of service, traffic management, clock synchronization, security, and maintenance of the network. This document contains use cases that show how utilities tackle their WAN engineering.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 61850-90-12-2020 PDF

IEC TR 61850-90-12-2020 PDF

$299.49 $598.97