Design Automation - Part 1-1: Harmonization of ATLAS Test Languages
Introduction: Commercial airline manufacturers and carriers, United States Department of Defense (DoD) and DoD contractors, United Kingdom Ministry of Defence (MoD) and MoD contractors, as well as other NATO member countries MoDs and contractors each use implementations of a test language standard called ATLAS. The ATLAS language standard specification used by the commercial airlines is maintained and published by ARINC. The Common ATLAS (C/ATLAS) standard specification used by the defense industries is maintained and published by the IEEE on behalf of the American National Standards Institute (ANSI). The ATLAS language specification maintained by ARINC and the C/ATLAS language standard maintained by the IEEE, initially started from a common base line, which over time, has seen the two standards diverge (see figure 2) with respect to language syntax and semantics (e.g. similar to having two dialects of the English language). The International Electrotechnical Commission (IEC) plans to publish soon the IEEE Std. 716-1995 C/ATLAS as IEC standard 61926 – ATLAS. This technical paper is the response to the IEC request that an effort be undertaken to determine how the two diverged dialects of the ATLAS definition could best be brought back into harmonization. This harmonization would allow for a common use of the ATLAS language across both the commercial airline and defense communities. This technical report presents the result of the efforts performed by the authors to first compare and contras
Scope: This technical report is applicable to the ATLAS language, the purpose of which is to define a high order language used for the writing of test programs for UUTs, so that these programs can operate on various makes and models of ATE / Automatic Test Systems (ATS). There are at present two published language definitions of the ATLAS language; this technical report will address the differences between these and provide recommended harmonization and/or convergence of the two standard definitions. The basis for this technical report are chapters/clauses 1 through 17 of the published IEEE Std. 716-1995 (C/ATLAS) and ARINC Specification 626-3 (ATLAS) publications. The IEEE published IEEE Std. 716-95 in March of 1995, while ARINC published ARINC Specification 626-3 in January of 1995. Reference documents ARINC Specification 626-3, Standard ATLAS language for Modular Test 4) ARINC Specification 627, Programmers Guide for SMARTSystems using ARINC 626 ATLAS IEEE Standard 716-1995, Common Abbreviated Test Language for All Systems (C/ATLAS)5) IEEE Standard 771-1990, Guide for the use of ATLAS 6) IEEE Standard 993-1997, Test Equipment Description Language (TEDL)7) Definitions For definitions related to the use of C/ATLAS, see IEEE Std. 771; for definitions related to the use of ATLAS, see ARINC Specification 627. For the purpose of this technical report, the following definitions apply. 3.1 ATLAS the Standard ATLAS for Modular Test as defined in ARINC Specification 626-3 3.2 C/ATLAS the Common Abbreviated Test Language for All Systems as defined in IEEE Std. 716-1995 ________ 4) Currently being revised – see current IEEE and ARINC Working Groups for further information. 5) Copyright IEEE Standards, Piscataway, NJ. 6) Copyright IEEE Standards, Piscataway, NJ. 7) Copyright IEEE Standards, Piscataway, NJ.
Contents:
- FOREWORD
- INTRODUCTION
- Scope