IEC TR 62000 (REDLINE + STANDARD)-2021 PDF

IEC TR 62000 (REDLINE + STANDARD)-2021 PDF

Guidelines for combining different single-mode fibre sub-categories

$42.88 $85.75 -50%
Product Code: IEC TR 62000 (REDLINE + STANDARD)
Stock In Stock
Edition: 3.0
Published: 09/2021
Number of Pages: 30
File Size: 1 file

Available Options

Product Description

Guidelines for combining different single-mode fibre sub-categories

Scope: This document provides guidelines concerning single-mode fibre inter-compatibility. A given type category of single-mode fibre, for example B4 B-655, may can have different implementations by suitably optimising several of the following parameters: mode field diameter (hence effective area), chromatic dispersion coefficient, slope of the chromatic dispersion curve, cable cut-off wavelength. These guidelines indicate the items that should be are taken into account when planning to connect 1) different implementations of single-mode fibres of the same type category, for example different implementations of type Class B single-mode fibres, and 2) single-mode fibres of different types sub-categories, for example B1.1 B-652.B with B4 B- 655.C. See IEC 60793-2-50 for the attributes and definitions of single-mode fibre. The attributes and definitions of fibres covered in this document are given in Table 1. Table 1 – Correspondence table of various single-mode fibres Common name Use (IEC 6079-2-50) IEC Class ITU-T Recommendation Dispersion unshifted single- mode fibre Optimised for use in the 1 310 nm region but can be used in the 1 550 nm region B1.1 G.652 A, B Cut-off shifted single-mode fibre Optimised for low loss in the 1 550 nm region, with cut off wavelength shifted above the 1 310 nm region B1.2 G.654 Extended band dispersion unshifted single-mode fibre Optimised for use in the 1 310 nm region but can be used in the O, E, S, C and L-band (i.e. throughout the 1 260 nm to 1 625 nm range). B1.3 G.652 C, D Dispersion shifted single-mode fibre Optimised for single channel transmission in the 1 550 nm region. Multiple channels can only be transmitted if care is taken to avoid the effects of four wave mixing by, for example, moderating the power levels or appropriate spacing or placement of the channels B.2 G.653 Non-zero dispersion-shifted single-mode fibre Optimised for multiple channel transmission in the 1 550 nm region with a cut off wavelength that may be shifted above the 1 310 nm region B4 G.655 Wideband non-zero dispersion-shifted single-mode fibre Optimised for multiple channel transmission in the wavelength range of 1 460 to 1 625 nm with the positive value

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 62000 (REDLINE + STANDARD)-2021 PDF

IEC TR 62000 (REDLINE + STANDARD)-2021 PDF

$42.88 $85.75