Electricity Metering Equipment - Dependability - Part 11: General Concepts
Introduction: The present worldwide transition from electromechanical to static electricity metering equip- ment requires the application of the most recent results of reliability research to this new metering technology. This is of particular importance as metering equipment is expected to be in use for long unattended periods. The experience from more than a century of developing and manufacturing electromechanical meters is not entirely applicable to static meters, since both designs exhibit different failure modes. It is for this reason that a working group was created to investigate the applicability of presently available standards to the dependability of static electricity metering equipment. A further reason for this decision was that the procedures applied during type approval and acceptance inspection are not adequate to determine the reliability of static electricity metering equipment during the products life cycles from specification and design to decommissioning. The work program includes dependability management through data collection and analysis of field failure data, reliability testing, failure rate prediction and software aspects of dependability. The dependability of any equipment is determined by factors such as its function, complexity, design, manufacturing process, failure criteria, operating conditions, elapsed time in use, installation and maintenance procedures. Some of these elements are under the control of the manufacturer, while other elements are under the
Scope: This part of IEC 62059 covers general aspects of the dependability of static metering equipment for electrical energy measurement and load control. It contains information on the role in dependability management of the various parties involved and on the methods applicable during the whole life cycle. Reference documents IEC 60050(191), International Electrotechnical Vocabulary (IEV) – Chapter 191: Dependability and quality of service IEC 60300-3-2:1993, Dependability management – Part 3: Application guide – Section 2: Collection of dependability data from the field IEC/TR 62051:1999, Electricity metering – Glossary of terms IEC 62059-21, Electricity metering equipment – Dependability, Part 21: Collection of meter dependability data from the field 1 Terms and definitions For the purposes of this part of IEC 62059, the terms and definitions of IEC/TR 62051:1999 and IEC 60050(191), as well as the following definitions apply. 3.1 availability the ability of an item to be in a state to perform a required function under given conditions at a given instant of time or over a given time interval, assuming that the required external resources are provided [IEV-191-02-05] 3.2 category a class or group of objects which have the same quality in common 3.3 classification systematic placement into categories; alternatively, division of specimens or items into categories using one or more sorting factors ________ 1 To be published.
Contents:
- FOREWORD
- INTRODUCTION
- Scope