IEC TR 62282-7-3-2025 PDF

IEC TR 62282-7-3-2025 PDF

Fuel cell technologies-Part 7-3: Test methods-Status of accelerated tests for fuel cell stacks and components and perspectives for standardization

$132.41 $264.81 -50%
Product Code: IEC TR 62282-7-3
Stock In Stock
Edition: 1.0
Published: 03/2025
Number of Pages: 34
File Size: 1 file, 726 Bytes

Available Options

Product Description

Fuel cell technologies – Part 7-3: Test methods – Status of accelerated tests for fuel cell stacks and components and perspectives for standardization

Introduction: The scope of accelerated testing is to reduce the time for qualification of the degradation or the long-term performance of a specific cell, cell component, stack, stack module or stack component compared to testing at nominal operating conditions. To generate an accelerated test, operating conditions stress a test item or one of its components, usually through the exaggeration of one of the testing parameters (the so-called stress factor). The results of this test are expected to provide a comparative assessment of the robustness (or degradation) of the test item and possibly – through an established transfer function – an estimation of the projected lifetime of the test item under nominal (non-stressed) conditions. An accelerated test thus cannot be a self-standing experiment, since it cannot be applied universally to all cell technologies, architectures or material combinations. Degradation phenomena are different and occur heterogeneously for different fuel cell (stack) technologies and in different operating modes. Also, different fabrication process of cells and components can lead to different responses under stressed conditions (although the responses at nominal conditions could be similar). In any case, for each accelerated test, a benchmark test item (operated at nominal conditions and adequately characterized) is necessary in order to have a meaningful reference against which the accelerated test can provide the required understanding of long-term durability of tha

Scope: The objective of this document is to answer several questions that have been circulating in the area of fuel cell development for many years: "What do we know about influencing fuel cell degradation, can we control it and accelerate it in a predictable way, is there a need for accelerated test procedures and can these be formulated adequately enough to be captured in international standards?" This document is a generic assessment of the feasibility of standardizing accelerated test procedures (both proton exchange membrane (PEM) and oxide ion-conducting solid oxide cell (SOC) technologies) for fuel cell stacks that have been engineered for a specific system application. This document comprises a review of literature and projects, a discussion of the main physical phenomena of interest in accelerated testing campaigns (focusing on the cell and stack levels, not looking at the system as a black box), a compendium of measurement techniques that are applicable, and it suggests a macroscopic approach to the formulation of a representative accelerated testing campaign.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 62282-7-3-2025 PDF

IEC TR 62282-7-3-2025 PDF

$132.41 $264.81