Nuclear power plants – Instrumentation, control and electrical power systems – Guidance for the application of IEC 63147:2017/IEEE Std 497™-2016 in the IAEA / IEC framework
Introduction: a) Technical background, main issues and organisation of the document October 2010, during the Seattle meeting WG A9 experts proposed the circulation of a NWIP to develop an IEC standard to coincide with IEEE 497 published in 2010, “IEEE Standard Criteria for accident Monitoring Instrumentation for Nuclear Power Generating Stations”, see 45A/828/RM. July 2011, IEEE/NPEC informed IEC SC 45A of its decision to revise IEEE 497 in 2012 to take into account the recommendations made after the accident of Fukushima. IEEE/NPEC proposed this revision be made in cooperation with IEC SC 45A with the objective to publish an IEC/IEEE standard. The new IEEE 497 was to be prepared to have significant new technical content that reflects Fukushima lessons learned. September 2011 SC 45A P-members were invited to review IEEE 497 published in 2010, see 45A/852/DC. The goal of this review was to identify the necessary changes to introduce in this IEEE standard during its revision to produce an IEC/IEEE standard, see 45A/864/INF. February 2012, during the Karlsruhe IEC/IEEE projects meeting IEEE/NPEC/SC6 Champion presented information concerning the IEEE 497 and its foreseen revision. Following the debate held after the presentation it was confirmed that a restricted team of 4 IEC experts was to be set up by WG A9 for 3 or 4 e-meetings be held with 3 or 4 experts of IEEE to investigate on the possibility to launch a common revision. April 2012, the IAEA initiated work on a Nuclear Energy Series do
Scope: This document gives guidance for the application in the IAEA/IEC framework of the IEC 63147:2017/IEEE 497 corresponding to the adoption without modification of IEEE 497:2016. During their review of IEEE 497:2016, the experts of the review team noted that between the 2010 edition of the IEEE 497 and its 2016 edition: some IEC standards were added as normative references; an additional group of Type F variables was defined to cover parameters providing information to manage fuel damage scenarios and associated technical requirements were given; several paragraphs were removed from 6.2 of the 2010 edition, which gave requirements on diversity of design and defence in depth; the term “1E” was replaced by “safety system”. Nevertheless, two major issues for the possible direct adoption of IEEE 497:2016 as IEC/IEEE standard in the frame of the agreement AC/138/2002 were identified: The absence of reference to any function categorization scheme or system/equipment classification scheme. NOTE In fact that issue corresponds to the fact that IEC 61226 is not referred and used in IEEE 497:2016. The identification terminology issues to consider. The experts of the review team discussed technically those findings and IEC Central Office representative taking into account the discussion held in the review team advised the team to prepare this Technical Report to support their recommendation concerning the adoption of IEEE 497:2016 as IEC 63147:2017/IEEE 497 and to support its application in the IEC framework.
Contents:
- FOREWORD
- INTRODUCTION
- Scope