Electric components – Reliability – Failure rates at reference conditions
Introduction: This document is intended to support the reliability prediction of electric components as used in equipment and is aimed at organizations that do not have their own data. It can be used in conjunction with IEC 61709, which is its main purpose, but it can also be used as a supplement to any other reliability prediction technique. Reliability prediction is most useful in the early design phase of equipment. It can be used, for example, to identify potential reliability problems, the planning of logistic support strategies and the evaluation of design alternatives. It is important to appreciate that a failure rate is not an intrinsic and immutable property of a piece of equipment. It is important for an engineer involved either in collecting or using data to fully understand the factors that influence failure rate derivation and use. When performing reliability prediction, data are used coming from the following sources in the given order of preference: user data; manufacturer's data; handbook data. If user data are available for the prediction, then they are used. If no user data is available then the manufacturer’s data are examined and, if judged suitable, used. If no manufacturer’s data is available then handbook data or other data are examined and, if judged suitable, used. IEC 61709:2017, H.5.3, provides a list of handbooks and standards containing failure rates data. Selected sources were considered for this document and are listed. Failure rate data stated in this docume
Scope: This document provides failure rates at reference conditions for electric components, considering reference conditions defined in IEC 61709. Reference conditions are useful since they provide a known standard basis from which failure rates can be modified to account for differences in environment from the environments taken as reference conditions. To perform reliability prediction, which is described in IEC 61709:2017, Annex C, failure rates, together with assumptions and limitations, are used. IEC 61709 does not provide failure rates for components, but only provides models that allow failure rates obtained by other means to be converted from one operating condition to another operating condition. This document provides generic failure rates considering those contained in the list of selected sources, calculated at reference conditions, as defined in IEC 61709. In fact, although models are different, calculated values at reference conditions do not appear to be so different, hence allowing a consistent converging process. See also IEC 61709:2017, 4.6. Each user can easily calculate failure rates at any condition using IEC 61709.
Contents:
- FOREWORD
- INTRODUCTION
- Scope