IEC TR 63304-2021 PDF

IEC TR 63304-2021 PDF

Methods of measurement of the magnetic properties of permanent magnet (magnetically hard) materials in an open magnetic circuit using a superconducting magnet

$186.00 $371.99 -50%
Product Code: IEC TR 63304
Stock In Stock
Edition: 1.0
Published: 04/2021
Number of Pages: 50
File Size: 1 file, 4 Bytes

Available Options

Product Description

Methods of measurement of the magnetic properties of permanent magnet (magnetically hard) materials in an open magnetic circuit using a superconducting magnet

Introduction: Permanent magnet materials with high coercivity e.g. Nd-Fe-B magnets, have been used in industry and its usage increases rapidly to meet demands to improve energy saving and to increase efficiency of electromagnetic applications, e.g. traction motors for Electric Vehicle (EV) and Hybrid Electric Vehicle (HEV). However, there is no standard method which can determine all the magnetic properties of the permanent magnet materials with coercivity HcJ higher than 2 MA/m. The method specified in IEC 60404-5, which is a method of measurement in a closed magnetic circuit, can lead to significant measurement errors for measurement of HcJ ≥ 1,6 MA/m due to magnetic saturation in parts of the pole faces of the yoke (see IEC 60404-5). In order to solve the problem, several methods of measurement in an open magnetic circuit using a superconducting magnet (SCM) without a yoke have been developed. The methods using a SCM have been considered to be candidates for solution to accurate measurement of high performance permanent magnets. The method using a conventional SCM made of metallic superconducting coil has not been used widely for industrial applications due to costs for using expensive liquid helium, limited speed of variation of magnetic field strength, and the difficulty to deal with test specimens of industrial size. However, nowadays these problems have been solved thanks to the development of a ceramic SCM made of ceramic high temperature superconducting coil. This method has enabl

Scope: This Technical Report describes the general principle and technical details of the methods of measurement of the DC magnetic properties of permanent magnet materials in an open magnetic circuit using a superconducting magnet (SCM). This method is applicable to permanent magnet materials, such as those specified in IEC 60404-8-1, the properties of which are presumed homogeneous throughout their volume. There are two methods: the SCM-Vibrating Sample Magnetometer (VSM) method; the SCM-Extraction method. This document also describes methods to correct the influence of the self-demagnetizing field in the test specimen on the demagnetization curve measured in an open magnetic circuit. The magnetic properties are determined from the corrected demagnetization curve. NOTE These SCM-methods can determine the magnetic properties of permanent magnet materials with coercivity higher than 2 MA/m. The methods of measurement in a closed magnetic circuit specified in IEC 60404-5 can lead to significant measurement error due to saturation effects in the pole pieces of yoke for the magnetic materials with coercivity higher than 1,6 MA/m (see IEC 60404-5).

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 10 Determination of demagnetization curve
  • 11 Demagnetizing field correction
  • 12 Determination of principal magnetic properties
  • 13 Reproducibility
  • 14 Test report

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 63304-2021 PDF

IEC TR 63304-2021 PDF

$186.00 $371.99