Application of IEC 60335-2-27 for field inspections of UV emission of UV appliances
Introduction: IEC 60335-2-27 provides requirements on the emission of UV radiation by UV appliances as covered by its scope. These requirements are intended for determining compliance during the type-testing of the products in a laboratory environment. Later, market surveillance authorities would like to check this compliance at business locations in their territory, since the UV emission of these products can be influenced in different ways and health aspects can be ignored due to commercial interests, or just by a lack of knowledge. The exchange of emitters can have an especially significant influence on the emission character of UV appliances. Fluorescent UV lamps and high-pressure metal halide lamps are showing strong ageing behaviour and are replaced for performance reasons at least every 1 000 hours. IEC 60335-2-27 introduced in connection with IEC 61228 the so-called X/Y lamp equivalency code for UV fluorescent lamps and a marking on the appliances which lamps, with which code are to be used with the appliance. Additionally, IEC 60335-2-27:2024, 7.12 states: The instructions for UV appliances shall include the substance of the following: identification of components that can influence the ultraviolet radiation, such as filters and reflectors; identification of replaceable UV emitters and a statement that they are only to be replaced by types marked on the appliance. For fluorescent UV lamps for tanning, it shall be stated that they are only to be replaced by types marked with an equ
Scope: This document brings clarification and guidance concerning the assessment of the UV emission output of UV appliances in the field with respect to the type-testing requirements of IEC 60335-2-27:2024, Clause 32. NOTE Periodic electrical inspection following IEC 60335-1:2020, informative Annex A can be additionally required in some countries.
Contents:
- FOREWORD
- INTRODUCTION
- Scope