IEC TS 60076-23-2018 PDF

IEC TS 60076-23-2018 PDF

Power transformers - Part 23: DC magnetic bias suppression devices

$163.93 $327.86 -50%
Product Code: IEC TS 60076-23
Stock In Stock
Edition: 1.0
Published: 01/2018
Number of Pages: 36
File Size: 1 file, 828 Bytes

Available Options

Product Description

Power transformers - Part 23: DC magnetic bias suppression devices

Introduction: In some cases, abnormal direct current (DC) is introduced into the AC power network and has adverse effects upon neutral grounded power apparatuses such as power transformers. Case 1 Direct current flows into the AC power network through grounded neutral points of transformers when an HVDC transmission system operates in monopole ground return mode or in bipolar unbalanced mode. Case 2 Quasi-DC is induced in the AC power network by geo-magnetically induced current (GIC) during the period of a solar magnetic storm. Case 3 Electric traction locomotives and some large capacity power electronic equipment may cause DC current in AC power network. DC current flowing through transformer windings may cause DC magnetic bias of the transformers, presenting a safety risk for both the transformers and the power system. The mechanism and harmful effects of DC bias are shown in Annex A and Annex B. Two techniques for suppressing the transformer DC bias current are presented in this document, respectively to limit or block the transformer bias current produced by the HVDC transmission system. The two techniques can also be used to suppress transformer DC bias caused by GIC, electric traction locomotives and some large capacity power electronic equipment. However, these issues are not included in this document due to their complexity. This document defines the technical requirements for the two types of DC current suppression devices that are connected to neutral points of power transformers

Scope: This document specifies requirements for devices for the suppression of DC magnetic bias of power transformers and convertor transformers. It includes requirements for service conditions, structures, testing, packing, transport and storage. The devices are connected to neutral points of power transformers and converter transformers to suppress DC bias current in the case an HVDC system is operated in monopole ground return mode or bipolar unbalanced mode. In the case of dedicated metallic return HVDC system, the devices are useful to mitigate DC stray current flowing through power transformers and converter transformers during transient conditions such as DC line fault. This document applies to DC magnetic bias suppression devices for operation at frequencies of 50 Hz and 60 Hz on power systems having voltages above 110 kV.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 60076-23-2018 PDF

IEC TS 60076-23-2018 PDF

$163.93 $327.86