Explosive atmospheres – Part 43: Equipment in adverse service conditions
Introduction: IEC 60079-0 specifies the requirements for electrical equipment intended for use in explosive atmospheres at standard atmospheric conditions: temperature –20 °C to +60 °C; pressure 80 kPa (0,8 bar) to 110 kPa (1,1 bar); and air with normal oxygen content, typically 21 % v/v. In some cases, other parts of the IEC 60079 series also specify conditions outside the above range, for example in IEC 60079-1. IEC 60079-0 states the normal ambient temperature range as –20 °C to +40 °C and states that electrical equipment designed for use in other than this normal ambient temperature range is considered to be special and includes additional marking to communicate this to the user. IEC 60079-14 includes requirements for users to select and install equipment so that it is suitable for the environmental conditions, but does not provide any specific guidance for installations outside of the standard atmospheric conditions or for other adverse environmental conditions. Extreme climate conditions in Polar environments are challenging to explosion protection technology and solutions. Conditions such as snow build-up, icing from spray and freezing of precipitation can negatively affect the operation and safety of equipment. Extreme low temperatures and weather conditions make it difficult to process hydrocarbons in open outdoor process areas and it can also be challenging for equipment operation. Measures to deal with these challenges are often called 'winterization'. This document is a guide f
Scope: This part of IEC 60079, which is a Technical Specification, provides guidance for equipment for use in explosive atmospheres in environments which may include ambient temperatures below –20 °С, and additional adverse conditions, including maritime applications. The purpose of this document is to provide recommendations to be considered for the design, manufacture and use of equipment. It is intended that this document be used for equipment operating within the environmental range specified on the certificate for the equipment. NOTE For detailed classification of climate conditions refer to IEC 60721 series and IEC 60068-1. This document is intended to be used in conjunction with the IEC 60079 series and the ISO/IEC 80079 series.
Contents:
- FOREWORD
- INTRODUCTION
- Scope