IEC TS 60255-216-1-2025 PDF

IEC TS 60255-216-1-2025 PDF

Measuring relays and protection equipment - Part 216-1: Digital interface - General requirements and tests for protection functions using digital communication as input and output

$299.49 $598.97 -50%
Product Code: IEC TS 60255-216-1
Stock In Stock
Edition: 1.0
Published: 08/2025
Number of Pages: 180
File Size: 1 file, 3 Bytes

Available Options

Product Description

Measuring relays and protection equipment - Part 216-1: Digital interface - General requirements and tests for protection functions using digital communication as input and output

Introduction: Process bus based on the IEC 61850 series (referred to as “IEC 61850” in this document) is being introduced widely in the protection automation and control systems (PACS). There are standards for digitally interfacing instrument transformers, in particular IEC 61869-9. In order to ensure functional interoperability, the standards of protection functions are being adapted to take this into account. The intention of this document is to define characteristics and requirements to be implemented to reach functional interoperability and simplify Protection, Automation and Control System (PACS) design and implementation for users. This document describes the global framework for digitally interfaced protection functions, namely the relevant features in IEC 61850 and the properties of the sampled values (SV) defined in IEC 61869-1 and IEC 61869-9 used by protection functions. This is done in Annex K (Clause K.1). Subclause K.1.1 covers SV published by Stand Alone Merging Units (SAMU) (IEC 61869-13:2021) or Low Power Instrument Transformers (LPIT) (future IEC 61869-7 and IEC 61850-8). Specific requirements for protection functions are defined on this base in the clauses (Clauses 5 through 11). Sometimes this concerns an extension or a specific profile of IEC 61850 (e.g. some requirements to be mandatory instead of optional) and sometimes new requirements specific for protection functions are formulated. The associated tests are specified in Clause 12. Compared with wire terminal inter

Scope: This document covers protection functions with digital inputs and outputs complying with IEC 61850 series and IEC 61869 series, in particular regarding subscription to sampled values (SV) streams representing energising inputs instead of analog inputs (see Figure 1); subscription to GOOSE (e.g. circuit breaker position, circuit breaker failure); publication of GOOSE messages (e.g. trip signals); subscription to time synchronisation messages. On this basis, this document formulates requirements for protection functions with digital inputs and outputs and for the IED hosting them. The document also covers tests related to the functional interoperability and functional requirements of these protection functions, in addition to the general conformance tests required by IEC 61850-10:2012 and test related requirements in IEC TR 61850-10-3:2022 [1]1. Requirements regarding characteristics of the communication network are not within the scope of this document. Delays and jitter due to the network are taken into account by network engineering. The expected behaviour of protection functions in case of delays, jitter or loss of SV is covered by this document. Figure 1 below shows the functional chain of a protection function, where each IED is connected to the PACS communication network. This document only considers the data received and published by the protection function as shown in Figure 1. It describes the coordination between the digitally interfaced protection functions and the characteristics of the analog acquisition chain. NOTE 1 See the list of abbreviations in Clause 4. NOTE 2 IEC 61869-12 is under development. Figure 1 – Functional chain of a digitally interfaced protection function If not mentioned otherwise, the term “switch” in this document refers to the switches used in the communication network. The PACS communication network engineering and cyber security measures to be applied on PACS level are out of scope of this document. ___________ Numbers in square brackets refer to the Bibliography. IEC TS 60255-216-1:2025 © IEC 2025 Requirements for protection functions switching over between two redundant SV streams acquired by different acquisition chains bu

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 60255-216-1-2025 PDF

IEC TS 60255-216-1-2025 PDF

$299.49 $598.97