IEC TS 61244-3-2005 PDF

IEC TS 61244-3-2005 PDF

Long-term radiation ageing in polymers-Part 3: Procedures for in-service monitoring of low-voltage cable materials

$132.41 $264.81 -50%
Product Code: IEC TS 61244-3
Stock In Stock
Edition: 2.0
Published: 11/2005
Number of Pages: 36
File Size: 1 file, 533 Bytes

Available Options

Product Description

Long-term radiation ageing in polymers – Part 3: Procedures for in-service monitoring of low-voltage cable materials

Introduction: Polymers are widely used as electric insulating materials (e.g. in cables for control, instrumentation and power) in environments in which they are exposed to radiation. In such applications, these materials may well be required to survive the full working life of the plant, which may be more than 40 years, and possibly accident conditions up to and at the end of their working life. Although considerable data are available on the behaviour of polymeric insulating materials under irradiation, there is still some uncertainty on the effects of long- term, low-dose rate irradiation such as would be experienced by cables. There is, therefore, a requirement for techniques for monitoring the state of degradation of cable materials in situ throughout the lifetime of the plant. Suitable cable monitoring techniques would also be important to surveillance programmes in support of plant life extension and licence renewal. Although this technical specification is primarily aimed at cable condition monitoring in radiation environments, it can also be applied to other polymeric components. Many of the techniques are equally applicable to thermal-only ageing of polymeric components.

Scope: This part of IEC 61244, which is a technical specification, summarizes the main cable monitoring techniques which are currently being assessed worldwide. These techniques are primarily aimed at monitoring degradation of low-voltage cables. Most of the methods are at the development stage and require more in-plant evaluation before they could be recommended as standard techniques. The advantages and disadvantages of each method, and its current state of development, are outlined in the following clauses.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 120 °C [5]

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 61244-3-2005 PDF

IEC TS 61244-3-2005 PDF

$132.41 $264.81