Electrostatics - Part 5-6: Protection of electronic devices from electrostatic phenomena - Process assessment techniques
Introduction: This document describes a set of methodologies, techniques, and tools that can be used to characterize a process where ESD sensitive items (ESDS) are handled. This document's procedures are meant to be used by those possessing knowledge and experience with electrostatic measurements. This document provides methods to determine the level of ESD risk that remains in the process after ESD control items and materials are implemented. These test methods' objective is to identify if possibly damaging ESD events are occurring or if significant electrostatic charges are generated on people, equipment, materials, components, or printed circuit board assemblies (PCBA) even though there are ESD control precautions in place. Sensitivities of ESDS are characterized by industry standard ESD testing and rated by their withstand voltages or withstand currents. This document is intended to provide methods to determine whether items of a given withstand voltage or withstand current are at risk in the process. The wide variety of ESD control items and materials and the environment in which these items are used can require test setups different from those described in this document. Users of this document can adapt the test procedure and setups described in Annex A to produce meaningful data for the user's application. Organizations performing these tests can determine if on-going process characterization is necessary, and if so, the time interval between observations. These observations can als
Scope: This part of IEC 61340 establishes a set of methodologies, techniques, and instruments to characterize a process where electrostatic discharge (ESD) sensitive items (ESDS) are handled. ESD risk assessment covers risks by charged personnel, ungrounded conductors, charged ESDS, charged insulators, and ESDS in an electrostatic field. This document applies to activities that manufacture, process, assemble, install, package, label, service, test, inspect, transport, or otherwise handle electrical or electronic parts, assemblies, and equipment susceptible to damage by electrostatic discharges. This document does not apply to electrically initiated explosive items, flammable gases and liquids or powders. The document does not address program management, compliance verification or program manager/coordinator certification. Risks due to electromagnetic sources that produce AC fields are not considered. Descriptions of measurement techniques are given in Annex A. Annex B provides best practices for grounding automated handling equipment (AHE), Annex C summarizes the best practices to prepare an effective ESD risk assessment, and Annex D introduces mitigation measures resulting from the ESD process assessment.
Contents:
- FOREWORD
- INTRODUCTION
- Scope