IEC TS 61857-42-2025 PDF

IEC TS 61857-42-2025 PDF

Electrical insulation systems - Procedures for thermal evaluation - Part 42: Specific requirements for evaluation of an electrical insulation system (EIS) used for road transportation applications

$211.22 $422.43 -50%
Product Code: IEC TS 61857-42
Stock In Stock
Edition: 1.0
Published: 08/2025
Number of Pages: 56
File Size: 1 file, 3 Bytes

Available Options

Product Description

Electrical insulation systems - Procedures for thermal evaluation - Part 42: Specific requirements for evaluation of an electrical insulation system (EIS) used for road transportation applications

Introduction: As per today all standards to evaluate the lifetime of electrical insulation system (EIS) are linked to the needs of industrial motors (e.g. IEC 60034-18-21 [1] developed in IEC TC 2 and IEC 61857-21 [2] developed in IEC TC 112). Drivetrain units for road transportation applications can have a similar technical concept to industrial motors but are different from them in terms of their operational demands. They mostly operate at variable loads and speeds, at increased mechanical stresses, at variable climatic conditions , and are powered from battery voltage levels such that they can pose a greater risk of partial discharges. The aim of this document is to close this gap and to provide users with a suitable test procedure to evaluate the EIS in drivetrain units for road transportation. As a key example, one parameter is the estimated lifetime of the unit. While industrial motor EIS is typically qualified based on a thermal evaluation of 20 000 h lifetime, drivetrain units for passenger cars are designed for a typical lifetime of 8 000 h. This document gives guidance on how to adjust the test procedure for the thermal evaluation to the particular and unique need of the individual application. Other influences on the EIS, like compatibility with cooling fluids (oils), different mechanical load profiles are possible to screen by using a multifactor evaluation and an adjusted lifetime can be calculated. In the IEC 61857 series, thermal ageing is the dominant ageing stress for the

Scope: This document provides a procedure to evaluate the lifetime of an electrical insulation system (EIS) in a drivetrain unit within road transportation (automotive) applications. Typical applications include motors and generators in hybrid and full electric passenger vehicles, light- duty and heavy-duty commercial vehicles, as well as buses. In general, the IEC 61857 series is applicable to EIS used in electrotechnical products with an input voltage of up to 1 000 V where the predominant ageing factor is thermal. In the context of this document the limit of 1 000 V is understood to be the application-specific battery DC voltage. The EIS evaluated by this procedure will operate free from partial discharges over its whole lifetime. Evaluation of EIS in the following applications is outside the scope: motors and generators within the scope of IEC TC 2, Rotating machinery; rail traction machines in the scope of IEC TC 9, Electrical equipment and systems for railways; motors and generators for road vehicles that are not intended for the traction of them.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 61857-42-2025 PDF

IEC TS 61857-42-2025 PDF

$211.22 $422.43