Nanomanufacturing – Material specifications – Part 5-2: Nano-enabled electrodes of electrochemical capacitors – Blank detail specification
Introduction: This Technical Specification specifies how to report the various characteristics of electrodes for industrial use in electrotechnical products, and how to incorporate these into a bilateral detail specification between vendor and user. Electrochemical capacitors are widely used in the fields of electric vehicles, high speed trains, aircraft, photovoltaic, wind power and electronics, due to their ultra-fast charge/discharge capability, long cycle life, wide working temperature range, high security reliability and low maintenance cost [1]1. In the manufacture process of electrochemical capacitor, the electrode is a bridge between raw material and device. Therefore, the performance of the electrode is very critical in the whole electrochemical capacitor industry chain because the properties of electrodes not only reflect the performance of upstream raw material but also determine the performance of electrochemical capacitor [2][3][4][5][6][7][8][9]. For the purposes of development and commercialization of raw nanomaterials for electrodes and the electrochemical capacitor and assembly produced therefrom, the product characteristics and characterization methods need to be specified in a standardized way. This blank detail specification will benefit different stakeholders as follows: for material suppliers, it provides necessary feedback from the manufacturers to guide the design and production of raw materials; for the end-product manufacturers, it provides a toolbox for evaluatin
Scope: This part of IEC 62565, which is a Technical Specification, establishes a blank detail specification that lists the relevant key control characteristics (KCC) including chemical, physical, structural, and electrochemical characteristics of nano-enabled electrode for electrochemical capacitors. Electrodes of both electric double layer capacitors and pseudo capacitors with nano/ nanostructured materials such as nanoporous activated carbon, graphene, carbon nanotube, carbon black, carbon aerogel, carbon nanomaterial coating collector, etc., are included. For other electrodes, this document can be used for reference. In addition, this document enables the customer to specify requirements in a standardized manner and to verify through standardized methods that the nano-enabled electrode of the electrochemical capacitors meets the required properties. Numeric values to be specified for the characteristics in this document are intentionally left blank and are determined by agreement between customer and electrochemical capacitor supplier. Properties and characteristics deemed by the customer or supplier as not relevant to a specific application are classified as "not applicable" or "not specified".
Contents:
- FOREWORD
- INTRODUCTION
- Scope