IEC TS 62600-3-2020 PDF

IEC TS 62600-3-2020 PDF

Marine energy-Wave, tidal and other water current converters-Part 3: Measurement of mechanical loads

$255.36 $510.71 -50%
Product Code: IEC TS 62600-3
Stock In Stock
Edition: 1.0
Published: 05/2020
Number of Pages: 96
File Size: 1 file, 2 Bytes

Available Options

Product Description

Marine energy – Wave, tidal and other water current converters – Part 3: Measurement of mechanical loads

Introduction: This part of IEC 62600 outlines specifications for the full-scale mechanical loads measurement on hydrodynamic marine energy converters (MECs). It is directed at a technology readiness level (TRL) of 7 to 9, meaning the last prototype or the first production device. This document also outlines the demands for full-scale structural testing of rotor blades as well as the interpretation and evaluation of test results. In the process of structural design of marine energy converters, thorough understanding and accurate quantification of the loading is of utmost importance. In the design stage, loads can be predicted with simulation models and codes. However, such models have their modelling restrictions and uncertainties, and they always need to be validated by measurement. Mechanical load measurements can be used both as the basis for design and as the basis for certification. The design of marine energy converters is covered by IEC 62600-2: Marine Energy – Wave, tidal and other water current converters – Part 2: Design requirements for marine energy systems. This document is aimed at the test institute, the marine energy converter manufacturer and the certifying body and defines the requirements for mechanical loads tests resulting in consistent and reproducible test results. There exists a large variety of marine energy converter working principles. This document aims to cover most hydrodynamic marine energy converter working principles. Therefore, generalised tests are present

Scope: 1.1 General This part of IEC 62600 describes the measurement of mechanical loads on hydrodynamic marine energy converters such as wave, tidal and other water current converters (including river current converters) for the purpose of load simulation model validation and certification. This document contains the requirements and recommendations for the measurement of mechanical loads for such activities as site selection, measurand selection, data acquisition, calibration, data verification, measurement load cases, capture matrix, post-processing, uncertainty determination and reporting. Informative annexes are also provided to improve understanding of testing methods. The methods described in this document can also be used for mechanical loads measurements for other purposes such as obtaining a measured statistical representation of loads, direct measurements of the design loads, safety and function testing, or measurement of subsystem or component structural loads. Through a technology qualification process, the test requirements can be adapted to the specific marine energy converter. This document also defines the requirements for full-scale structural testing of subsystems or parts with a special focus on full-scale structural testing of marine energy converter rotor blades and for the interpretation and evaluation of achieved test results. This document focuses on aspects of testing related to an evaluation of the structural integrity of the blade. The purpose of the tests is to confirm to an acceptable level of probability that the whole installed production of a blade type fulfils the design assumptions. 1.2 Subdivision of marine energy converter types There is a wide variety of marine energy converter types, especially concerning wave energy converters (WECs). For tidal energy converters and other current energy converters (CECs) the working principle of a turbine comprising blades connected to a rotor shaft, is common, whether seabed mounted or mounted to floating structures. However, there are also other types of tidal energy converters under development without blades connected to a rotor shaft and there are wave energy converters under development with

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 62600-3-2020 PDF

IEC TS 62600-3-2020 PDF

$255.36 $510.71