Nanomanufacturing – Key control characteristics – Part 4-6: Nano-enabled electrical energy storage – Determination of carbon content for nano-enabled electrode materials, infrared absorption method
Introduction: Electrical energy storage devices have been utilized in many applications such as portable electronics, electric vehicles and aircraft. Rapid development in these markets poses great demand for high-performance devices, in which the main properties are determined by their electrode materials. Carbon content has significant influence on the performance and quality of electrode material. Carbon serves as a conductive agent improving interparticle electron conduction performance, therefore a suitable amount of carbon is necessary. When its amount is not enough, it is possible the conductivity will not improve effectively and this causes high internal resistance, low discharge platform or low capacity, which can result in bad rate performance and cycling life. On the other hand, high carbon content can have a tendency to aggregate and be hard to separate, which may introduce factory processing problems. Superfluous carbon can influence the power density of the batteries as carbon has relatively low specific capacity.[1][2]1 However, nano-sized powder can be easily flowed away with gas flow in the furnace chamber, which influences the determination of carbon content and may contaminate the test system. This document provides a method to measure the carbon content of nano electrode materials that will be employed in electrical energy storage devices, and to evaluate the best combinations of composite material recipes of nano electrodes. Following this method will allow comparison o
Scope: This part of IEC 62607, which is a Technical Specification, provides a method for determination of carbon content of nano electrode materials by infrared absorption spectroscopy method. The method is applicable to carbon contents of mass fraction between 0,001 % and 100 %. This method will enable customers to: a) decide whether or not a nano electrode material is usable, and b) select a nano electrode material with suitable carbon content for its application. This document includes: recommendations for sample preparation, outlines of the experimental procedures used to measure electrode nanomaterial properties, methods of interpretation of results and discussion of data analysis, and case studies.
Contents:
- FOREWORD
- INTRODUCTION
- Scope