Nanomanufacturing – Key control characteristics – Part 7-2: Nano-enabled photovoltaics – Device evaluation method for indoor light
Introduction: Commercialization of nano-enabled solar cells, such as organic solar cells, is being promoted by utilizing their advantages over conventional solar cells, such as light weight, flexibility, colour, transparency, and coating processability. Energy harvesting applications that generate power using indoor light have been recognized as important applications for nano solar cells in conjunction with recent advances in the Internet of Things. In general, nano solar cells have a large band gap and are suitable for power generation under indoor lighting whose spectra are localized in the visible light region. In addition, since the low illuminance characteristics can be improved by devising the configuration, it is expected to be suitable for energy harvesting using indoor light. The IEC 60904 series specifies evaluation methods for sunlight. In IEC 60904, the most important factors in evaluating a solar cell are the selection of a light source and the method of adjusting its irradiance for measurement. By changing the light source from sunlight to indoor light, an evaluation method under indoor light can be obtained. The clause structure of this document corresponds to that of IEC 60904. While light sources are limited to sunlight in the outdoor environment, various light sources are used indoors, such as fluorescent lamps and LED lamps in addition to sunlight. The indoor brightness is expressed by illuminance in lux (lx), which takes into account the sensitivity of the human eye. S
Scope: This Technical Specification specifies the efficiency testing of photovoltaic cells (excluding multi-junction cells) under indoor light. Although it is primarily intended for nano-enabled photovoltaic cells (organic thin-film, dye-sensitized solar cells (DSC), and Perovskite solar cells), it can also be applied to other types of photovoltaic cells, such as Si, CIGS, GaAs cells, and so on.
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- 10 Spectral-mismatch correction
- 11 Spectral responsivity
- 12 Illumination sources