Conductors for overhead lines – Fiber reinforced composite core used as supporting member material – Part 2: Metallic matrix composite cores
Introduction: The first conductors using a composite core were installed in the early 2000s. Since then, they have been increasingly used by utilities worldwide. As a result, there is a need for an IEC publication to agree on tests methods to qualify these cores. Because of the potential variety of products possible for this purpose, this document does not set minima or maxima (usually provided by the manufacturer, but rather standardizes testing methods to ascertain the numerical values of the basic properties needed by the purchaser to choose the right supporting member material according to the properties of the overhead line conductors. Future discussion items for review may include: performance level and acceptance criteria, other ageing tests and criteria or other relevant tests. In a future document, tests on the complete conductor which include the composite core will be covered in detail (for example salt fog, corrosion test, mechanical tests, etc.).
Scope: This part of IEC 62818, which is a Technical Specification, establishes a system of fiber reinforced composite cores used as supporting member material in conductors for overhead lines which may be used as the basis for specifications. This document is applicable to fiber reinforced composite core, with a metallic matrix, used as supporting member material in conductors for overhead lines. This document gives guidance on: defining the common terms used for fiber reinforced composite cores with a metallic matrix, prescribing common methods and recommendations to characterize the properties of fiber reinforced composite cores based on single or multi-wires, with MMC (Metallic Matrix Composite) used as a supporting member material in conductors, prescribing or recommending acceptance or failure criteria when applicable. These tests, criteria and recommendations are intended to ensure a satisfactory use and quality under normal operating and environmental conditions. This document does not prescribe performance or compliance criteria which may be required but indicative values could be given in Annexes for guidance.
Contents:
- FOREWORD
- INTRODUCTION
- Scope