IEC TS 62996-2017 PDF

IEC TS 62996-2017 PDF

Industrial electroheating and electromagnetic processing equipment-Requirements on touch currents, voltages and electric fields from 1 kHz to 6 MHz

$186.00 $371.99 -50%
Product Code: IEC TS 62996
Stock In Stock
Edition: 1.0
Published: 09/2017
Number of Pages: 46
File Size: 1 file, 1 Byte

Available Options

Product Description

Industrial electroheating and electromagnetic processing equipment – Requirements on touch currents, voltages and electric fields from 1 kHz to 6 MHz

Introduction: Touch and touch currents and voltages constitute a very important category of electrical safety issues particularly for electroheating (EH) equipment and equipment for electro- magnetic processing of materials (EPM). The equipment manufacturer is mandated to adequately reduce any hazard from touching live equipment parts. For being able to do so, assessments and verifications are necessary for determination of hazards. During the drafting of IEC 60519-1:2015, it became apparent that there was a need for a technical specification providing an overview, a guidance and requirements for users of that standard, and dealing with the nearest higher frequency interval above that of IEC 61140 and IEC 60204 (all parts). A revised IEC 61140:2016 covers issues up to 1 kHz (up to 200 Hz in earlier editions). Thus, this document deals with touch and touch currents and voltages in the frequency range from 1 kHz to 6 MHz. This range was adopted due to deviating frequency dependence of skin impedances below 1 kHz. In principle, cases with strong external electric fields where the person is not touching the live insulated or bare live conductor are closely related to cases where the person is actually touching an insulated live conductor. These cases of currents in parts of the body by capacitive coupling are therefore included in this document. NOTE A parallel IEC technical specification IEC TS 62997:2017 is developed by TC 27, dealing with the magnetic nearfields from 1 Hz to 6 MHz. The uppe

Scope: This document addresses the safety assessments in the frequency range between 1 kHz and 6 MHz and provides limits for touch and touch currents for industrial installations or equipment for electroheating (EH) and electromagnetic processing of materials (EPM). Indirect contact by capacitive currents to parts of an earthed human body in an open space are also included, since the current is then distributed analogously in the part of the body and differs from cases of induced electric shock. NOTE 1 Induced electric shock phenomena are caused by the alternating magnetic field external to a current-carrying conductor, inducing an electric field in a part of the body in the vicinity of or directly contacting it. The causes are thus different from those causing electric shock phenomena and are dealt with in IEC TS 62997 on magnetic nearfield safety, developed by TC 27. The overall safety requirements for the various types of EH or EPM equipment and installations in general result from the joint application of the general requirements specified in IEC 60519-1:2015 and related particular requirements covering specific types of installations or equipment. This document complements IEC 60519-1:2015. NOTE 2 This document complements Annex B in IEC 60519-1:2015. On contacting, this document is based primarily on a movement of the primary contact area in relation to the live part, resulting in a contact or touch current. The awareness, perception and reaction times differ in comparison with a situation where a person is, for example, leaning towards or holding a conductor which subsequently becomes live, or a similar fault condition. Different considerations are then applicable and are dealt with in a detailed way in this document. Since high impedances for dry skin will result in the lowest touch current and the dryness is typically variable, data for only moist and wet skin are used in this document.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 62996-2017 PDF

IEC TS 62996-2017 PDF

$186.00 $371.99