Safety of machinery – Safety-related sensors used for the protection of persons
Introduction: Safety related sensors are applied to machinery presenting a risk of personal injury. They provide protection by causing the machine to revert to a safe condition before a person can be placed in a hazardous situation. IEC 61496 (all parts) provides design and performance requirements of electro-sensitive protective equipment (ESPE). It gives a clear but limited guideline for specific sensor technologies (like optical sensors) or sensing functions (like capability to detect a specified object); typical conditions representing indoor use in industrial environment; detection of objects representing parts of body of adults using the properties geometry and reflectivity; design, functional requirements and tests in accordance with ESPE specific safety performance classification in types (2,3 and 4). Autonomous systems like au tom ated g ui de d ve hic les (AGV), service robotics or human machine interaction in industries show an increasing demand, for example in new sensor technologies (e.g. radar, ultrasonic sensors), new kind of sensor functions (e.g. classification of objects, position of an object), and combination of different sensor technologies in a sensor system. Sensor manufacturers or integrators use in such cases generic functional safety standards as guideline for the safety related product design. Generic functional safety standards like IEC 61508 (all parts) or sector specific machinery standards like IEC 62061 or ISO 13849 (all parts) are general and product design
Scope: This Technical Specification gives requirements for the development and integration of safety related sensors (SRS) and safety related sensor systems (SRSS) used for protection of persons with special attention to systematic capabilities. This generic standard only applies if protection of persons is to be performed by using sensors, and standards for functional safety of electrical control systems address sensor(s) as subsystem or subsystem element, and product specific sensor standards (e.g. IEC 61496 (all parts), IEC 60947-5-2) do not contain all necessary provisions, or product specific sensor standards are not developed. The approach of examination of systematic capabilities by using different safety related sensor standards is described in Annex A. The requirements and methods within this document are limited to the purpose of protection of persons by detection of potentially hazardous objects, by detection of a body, parts of a body and objects associated to parts of a body entering a hazardous area, or by classification respective discrimination of these against other objects. NOTE 1 Application of SRS/SRSS in public can require detecting not only of persons, but also their associated equipment, for example wheelchairs, walking sticks or infusion stands. Performance classes of sensors and sensor systems are defined in accordance with existing functional safety standards (e.g. IEC 62061, IEC 61508 (all parts), and ISO 13849 (all parts)). NOTE 2 T here will be no definitions of or interconnections to the types as defined in IEC 61496-1 within this document to simplify and prevent misuse. Simplification for end users is achieved by correlation to existing PL, SIL or SILcl. Special attention is given to the sensing function and dependability of the detection capability. Environmental influences and tests for indoor and outdoor use are defined which influence the sensing function and dependability of the detection capability. NOTE 3 Environmental influences, their classification and test procedures are primarily specified in accordance with generic environmental standards. More specific requirements and tests are only described in absence of respective standa
Contents:
- FOREWORD
- INTRODUCTION
- Scope