IEC TS 63042-101-2019 PDF

IEC TS 63042-101-2019 PDF

UHV AC transmission systems - Part 101: Voltage regulation and insulation design

$132.41 $264.81 -50%
Product Code: IEC TS 63042-101
Stock In Stock
Edition: 1.0
Published: 01/2019
Number of Pages: 34
File Size: 1 file, 1 Byte

Available Options

Product Description

UHV AC transmission systems - Part 101: Voltage regulation and insulation design

Introduction: Large-scale power sources including renewable energy have recently been developed. To meet the requirements for large power transmission capacity, some countries have introduced, or are considering introducing, ultra high voltage (UHV) transmission systems, overlaying these on the existing transmission systems at lower voltages such as 420 kV and 550 kV. However, the introduction of UHV AC also presents many challenges to planners and operators. One of the major challenges is the management and control of system voltage and reactive power control. Reactive power control is normally used to address power frequency voltage requirements and maintain the voltage under transient conditions. Suitable insulation designs and coordination procedures are adopted in order to control transient overvoltages and prevent damage to equipment. The objective of UHV AC power system design is to achieve both economic efficiency and high reliability, considering its impact on systems at lower voltages such as 420 kV and 550 kV. Long-distance transmission lines in particular generate a large amount of charging reactive power (Mvar) that could cause the system voltage to rise significantly. For example, when energizing a transmission line, the terminal voltage at the remote end could reach an unacceptable level. Reactive power compensation is implemented to ensure that the UHV AC system operates within an adequate voltage range under normal conditions and any contingency conditions that the system

Scope: This part of IEC 63042 specifies reactive power compensation design, voltage regulation and control, and insulation design for the coordination of UHV AC transmission systems.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 63042-101-2019 PDF

IEC TS 63042-101-2019 PDF

$132.41 $264.81