IEC PAS 61249-8-1-2014 PDF

IEC PAS 61249-8-1-2014 PDF

Qualification and performance of electrical insulating compound for printed wiring assemblies

$72.51 $145.02 -50%
Product Code: IEC PAS 61249-8-1
Stock In Stock
Edition: 1.0
Published: 06/2014
Number of Pages: 24
File Size: 1 file, 406 Bytes

Available Options

Product Description

Qualification and performance of electrical insulating compound for printed wiring assemblies

Scope: 1.1 Scope This standard establishes qualification and conformance requirements for electrical insulating com- pounds (conformal coatings). It has been designed and con- structed with the intent of obtaining maximum confidence in the materials with minimum test redundancy. This stan- dard covers: • The qualification and qualification retention of the confor- mal coating material (Table 3-1, Column A and B). • The quality conformance of conformal coating material properties (Table 3-1, Column C). For the purpose of this standard, the term conformal coat- ing is used herein when referring to a type of protective coating for use on printed wiring assemblies. The confor- mal coating is intended to provide protection from moisture and contamination and provide electrical insulation; not as a sole source of mechanical support. For the purpose of this standard, inspections are performed on standardized test vehicles instead of real production assemblies. A standardized test vehicle refers to the test vehicle specified per test method indicated, coated with the conformal coating under inspection. 1.2 Purpose With standardized testing on standardized test vehicles under test conditions specified in test methods listed herein, this standard enables a manufacturer to qualify his conformal coating product and express the qualification it possesses. This standard also enables the manufacturer to attest the conformance of the quality of production to the qualification of each product. 1.3 Classification 1.3.1 Types Conformal coatings shall be categorized into types by the cured chemistry of the coating. The type for multifunctional materials shall be based on the chemis- try type which is the highest percentage by weight. Conformal coatings shall be of the following types: Type AR — Acrylic Type ER — Epoxy Type SR — Silicone Type UR — Polyurethane Type XY— Paraxylylene 1.3.2 Classes Although previous versions of IPC-CC- 830 made reference to Class A and Class B coating classi- fications, these classifications have been removed. To be qualified to this specification, a coating must be hydrolyti- cally stable (formerly Class B). Non-hydrolytically stable coatings (formerly Class A) no longe

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC PAS 61249-8-1-2014 PDF

IEC PAS 61249-8-1-2014 PDF

$72.51 $145.02