Communication networks and systems for power utility automation - Part 90-28: Specification for subscriber IED to validate GOOSE and SV messages
Introduction: GOOSE and SV messages carry critical data as measurements, trip signals, blocking signals, etc. which are exchanged between IEDs. Those messages could cause a mis-operation if they are processed when they should not be. Therefore, it becomes critical to make validation of those messages more resilient to ensure that data forwarded to the application are the expected ones. Each vendor implements validation on different parameters of the GOOSE and SV messages. Therefore validation has to be harmonized. In addition, this will make commissioning easier. Issues caused by the engineering process or human error during operation is expected to be detected by subscriber IED. Efficient filtering of messages is expected to be implemented to achieve expected timing performance. IEDs must notify the user of any identified issues so they can be validated by testing. The aim of this Publicly Available Specification is to provide new requirements related to validation of GOOSE and SV messages for the IEC 61850 series: Part 6 for configuration description, Part 7-x for data model and abstract services, Part 8-1 and part 9-2 for specific communication service mappings, Part 10 for conformance testing Once this document has been published, the affected parts of the core standards will be updated with the results from this specification. As it contains some description of the different parameters of the GOOSE and SV messages and some recommendations, this document could be used as a guideline fo
Scope: 1.1 General This of the IEC 61850 series, which is a Publicly Available Specification, specifies the expected behavior and associated documentation related to the validation of received GOOSE and SV messages. It considers engineering rules and guidance to ensure that the communication configuration process is well designed for this validation. Conformance statements related to this validation are also considered. This document considers subscribers claiming conformance to latest editions of the IEC 61850 series in combination with publishers claiming conformance to any previous version and revision of the IEC 61850 series. 1.2 Published versions of the standard and related namespace names Table 1 shows all tracking information of (Tr)IEC 61850-90-28:2024A namespace building-up. Table 1 – Tracking information of (Tr)IEC 61850-90-28:2024A namespace building-up Attribute Content Namespace IEC specific information Version of the UML model used for generating the document (informative) WG10build26 Date of the UML model used for generating the document (informative) 2026-08-05 Autogeneration software name and version(informative) j61850DocBuilder 02.06bbeta based on jCleanCim beta9.4 (derived from jCleanCim 02-02) Table 2 provides a reference between all published editions, amendments or corrigenda of this document and the full name of the namespace. Table 2 – Published version Edition Publication date Webstore Namespace Edition 1.0 2025-xx IEC PAS 61850-90-28:2025 (Tr)IEC 61850-90-28:2024 1.3 Identification of the namespace The namespace associated with this document is an NSD (Namespace Definition) file as defined in IEC 61850-7-7. NOTE The NSD files are distributed as a Full (complete machine-readable file) Code Component and as a Light (reduced machine-readable content version) Code Component. Table 3 shows all attributes of (Tr)IEC 61850-90-28:2024A namespace. IEC PAS 61850-90-28:2026 © IEC 2026 Table 3 – Attributes of (Tr)IEC 61850-90-28:2024A namespace Attribute Content Namespace nameplate Namespace Identifier (Tr)IEC 61850-90-28 Version 2024 Revision Release Full Namespace Name (Tr)IEC 61850-90-28:2024A Full Code Component Name IEC_PAS_61850-90-28.NSD.2024A2.F
Contents:
- FOREWORD
- INTRODUCTION
- Scope