IEC TR 60068-3-15-2024 PDF

IEC TR 60068-3-15-2024 PDF

Environmental testing-Part 3-15: Supporting documentation and guidance-Vacuum-assisted reflow soldering

$132.41 $264.81 -50%
Product Code: IEC TR 60068-3-15
Stock In Stock
Edition: 1.0
Published: 02/2024
Number of Pages: 32
File Size: 1 file, 5 Bytes

Available Options

Product Description

Environmental testing – Part 3-15: Supporting documentation and guidance – Vacuum-assisted reflow soldering

Introduction: As defined in ISO 857-2, reflow soldering is a joining process using an additional metal (solder) with a liquidus temperature of 450 °C or less, in which solder paste or preforms are reflowed. Reflow soldering can be carried out with the technical processes of convection (air or nitrogen), condensation (vapour phase), radiation (e.g. infrared) or contact heat. Sometimes it is not possible to achieve the required void level for an assembly only with methods listed above despite the use of all technical possibilities. Regarding void-induced asymmetrical stress constellations, a reduction of voiding can lead to a mitigated stress condition within the solder joints. Various technical requirements only tolerate very small void dimensions. To achieve these requirements, vacuum-assisted soldering can be applied with the above mentioned reflow soldering processes. In some product applications, a hermetic seal is required. The reliable fulfilment of this requirement is very demanding to the process technology especially complex assemblies. Vacuum-assisted soldering creates significantly more consistency in the results here. Further benefits of vacuum-assisted soldering are improved thermal management or high frequency performance (contour adaptation, mitigation of blow holes). Vacuum-assisted soldering, however, requires a different equipment with more complex structure and process control. Since the vacuum process has an impact on the process time, the suitability of the components a

Scope: This part of IEC 60068 describes vacuum-assisted soldering considering the thermal profiling, soldering methods, suitability of the components and vacuum features of soldering systems. It is based on practical experiences from manufacturers, component, material, and soldering systems suppliers. It supports manufacturers by providing information about the functionality of vacuum and effect of vacuum on components performance.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 60068-3-15-2024 PDF

IEC TR 60068-3-15-2024 PDF

$132.41 $264.81