Semiconductor devices – Part 5-12: Optoelectronic devices – Light emitting diodes – Test method of LED efficiencies
Introduction: The latest international standards for light emitting diode (LED) devices are IEC 60747-5-6:2016, IEC 60747-5-8:2019, IEC 60747-5-9:2019, IEC 60747-5-10:2019, and IEC 60747-5-11:2019, where terminology and measuring methods of basic electrical and optical characteristics of LEDs are given. This technical report gives guidance on the terminology and the measuring methods of various efficiencies of single light emitting diode (LED) chip or package without phosphor. White LEDs for lighting applications are out of the scope of this part of IEC 60747-5-12. The efficiencies whose measuring methods are described in this technical report are the power efficiency (PE), the external quantum efficiency (EQE), the voltage efficiency (VE), the internal quantum efficiency (IQE), and the light extraction efficiency (LEE). To measure these efficiencies separately, one needs the measurement data of the internal quantum efficiency (IQE). The IQE is a key performance parameter that represents the quality of epitaxial wafers and contains essential information on operational mechanisms. Requirements for accurate and reliable IQE measurements are suggested. The various IQE measurement methods reported so far are reviewed in detail from a theoretical and practical point of view. Subsequently, the technical limitations for these IQE measurement methods to meet the requirements for accurate and reliable IQE measurements are discussed. In particular, two different measuring methods of the IQE that can
Scope: This technical report discusses the terminology and the measuring methods of optoelectronic efficiencies of single light emitting diode (LED) chip or package without phosphor. White LEDs for lighting applications are out of the scope of this part. This technical report provides guidance on terminology of optoelectronic efficiencies of single LED chip or package without phosphor, such as the power efficiency (PE), the external quantum efficiency (EQE), the voltage efficiency (VE), the light extraction efficiency (LEE), the internal quantum efficiency (IQE), the injection efficiency (IE), and the radiative efficiency (RE) [1]1; test methods of optoelectronic efficiencies of the PE, the EQE, the VE, the LEE, and the IQE [1]; review of various IQE measurement methods reported so far in view of accuracy and practical applicability; the measuring method of the LED IQE based on the temperature-dependent electroluminescence (TDEL) [2]; the measuring method of the LED IQE based on the room-temperature reference-point method (RTRM) [3]; the measuring method of the radiative and nonradiative currents of an LED [4]; the relationship between the IQE and the VE, which leads to introduction of a new LED efficiency, the active efficiency (AE) as AE = VE × IQE.
Contents:
- FOREWORD
- INTRODUCTION
- Scope