IEC TR 60797-1984 PDF

IEC TR 60797-1984 PDF

Residual Strength of String Insulator Units of Glass or Ceramic Material for Overhead Lines After Mechanical Damage of the Dielectric

$15.77 $31.53 -50%
Product Code: IEC TR 60797
Stock In Stock
Edition: 1.0
Published: 1984
Number of Pages: 18
File Size: 1 file, 744 Bytes

Available Options

Product Description

Residual Strength of String Insulator Units of Glass or Ceramic Material for Overhead Lines After Mechanical Damage of the Dielectric

Introduction: All types of insulators can be damaged in service by external causes such as power arcs, vandalism and various other causes. The dielectric pa rt of a type B insulator (see Clause 4 of I EC Publication 383: Tests on Insulators of Ceramic Material or Glass for Overhead Lines with a Nominal Voltage Greater than 1 000 V), such as a cap and pin insulator, can also be damaged by electrical puncture. I EC Publication 383 does not contain a test for verification of the residual mechanical strength. If the insulator is not completely destroyed, its residual mechanical strength is important. In this report only toughened glass and ceramic cap and pin insulators and ceramic long rod insulators are considered. There are differences in the effective damage and the subsequent performance of these three types of insulator. Therefore, it is necessary to consider each type separately when discussing the residual strength and a residual strength test, even though all three types of insulators are intended for the same application as string insulator units on overhead lines. For ceramic cap and pin insulators, the degree of damage is variable, depending on the type and the force of the mechanical impact. Damage to the ceramic may cause a reduction of the mechanical strength of the insulator. In the case of toughened-glass cap and pin insulators, any breakage leads to the immediate and complete shattering of the glass into small pieces, including the pa rt inside the cap. A reduction of the mec

Contents:

  • FOREWORD
  • INTRODUCTION
  • 4.1 Classification
  • 4.2 Number of test pieces
  • 4.3 Previous tests
  • 4.4 Preparation of the test pieces
  • 4.5 Residual strength test
  • 4.6 Evaluation of the test results

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 60797-1984 PDF

IEC TR 60797-1984 PDF

$15.77 $31.53