Fibre optic communication system design guides – Part 10: Characterization of the quality of optical vector-modulated signals with the error vector magnitude
Introduction: 0.1 Introduction to vector modulated signals Vector or complex modulation is well known since the 1980s in mobile communication and in CATV transmission. In fibre optic telecommunication, coherent transmission was considered during the late 1980s to improve sensitivity and therefore the reach of an optic transmission line. With the introduction of EDFA optical amplification, the need for coherent transmission was then considered less urgent. Recently the foreseeable shortage of transmission capacity and the economic need to optimize transmission capacity without deploying new fibres lead back to the same approach taken for wireless communication in the early 1990s, expanding transmission capacity over a limited number of channels by working with digital complex modulation or vector modulation [1 – 3]1. The main difference to on-off keying is that vector modulation, as indicated by the name, is characterized by an additional dimension in modulation space: Modulation: on-off vector Amplitude Phase 0.2 Digital coding with vector modulation 0.2.1 General The additional phase dimension offers new possibilities for coding a binary signal and in particular for coding more than 1 bit to each digital symbol. That is, a symbol can be assigned to more than the two states 0 and 1. Consider the following bit stream This can, for example, be coded to a symbol alphabet consisting of four elements {A,B,C,D}, as shown. As two bits are combined to a new symbol, only half as many symbols need t
Scope: The purpose of this part of IEC 61282 is to define the error vector magnitude (EVM) as a metric for quantifying the quality of an optical vector-modulated (modulation of phase and possibly magnitude) signal from a transmitter or optical transmission link. The considerations required for reproducible measurement results are detailed. The relationships with other related parameters from constellation diagram analysis like error vector, phase error, magnitude error, I-Q offset and time-resolved EVM are described, as well as the relationship between EVM and Q-factor.
Contents:
- FOREWORD
- Introduction
- Scope