IEC TR 61282-9-2016 PDF

IEC TR 61282-9-2016 PDF

Fibre optic communication system design guides - Part 9: Guidance on polarization mode dispersion measurements and theory

$211.22 $422.43 -50%
Product Code: IEC TR 61282-9
Stock In Stock
Edition: 2.0
Published: 03/2016
Number of Pages: 60
File Size: 1 file, 1 Byte

Available Options

Product Description

Fibre optic communication system design guides - Part 9: Guidance on polarization mode dispersion measurements and theory

Introduction: This Technical Report is complementary to the International Standards describing PMD procedures (IEC 60793-1-48, IEC 61280-4-4, IEC 61290-11-1, IEC 61290-11-2 and IEC 61300-3-32) and other design guides on PMD (IEC 61282-3 and IEC 61292-5), as well as ITU-T Recommendation G.650.2. The system power penalty associated with PMD varies depending on transmission format and bit rate. It also varies with optical frequency and state of polarization (SOP) of the light source. At the output of a link, the signal can shift from a maximum delay to a minimum delay as a result of using different SOPs at the source. The difference in these delays is called the differential group delay (DGD), which is associated with two extremes of input SOP. At these extremes, a signal in the form of a single pulse appears shifted up or down by half the DGD, about a midpoint, at the output. At intermediate SOPs, the single pulse appears as a weighted total of two pulses at the output, one shifted up by half the DGD and one shifted down by half the DGD. This weighted total of two shifted pulses is what causes signal distortion. The system power penalty is partly defined in terms of a maximum allowed bit error rate and a minimum received power. In the absence of distortion, there is a minimum received power that will produce the maximum allowed bit error rate. In the presence of distortion, the received power should be increased to produce the maximum bit error rate. The magnitude of the required increase of

Scope: This part of IEC 61282, which is a Technical Report, describes effects and theory of polarization mode dispersion (PMD) and provides guidance on PMD measurements.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 61282-9-2016 PDF

IEC TR 61282-9-2016 PDF

$211.22 $422.43