Functional safety – Safety instrumented systems for the process industry sector – Part 4: Explanation and rationale for changes in IEC 61511-1 from Edition 1 to Edition 2
Introduction: IEC 61511 (all parts) addresses safety instrumented systems (SIS) for the process industry sector. It is written to use terminology that is familiar within this sector and to define practical implementation requirements based on the sector-independent clauses presented in the IEC 61508 basic safety standard. IEC 61511-1 is recognized as a good engineering practice in many countries and a regulatory requirement in an increasing number of countries. Nevertheless, standards evolve with the application experience in the affected sector. The second edition of IEC 61511-1 was edited based on a decade of international process sector experience in applying the requirements of the first edition of IEC 61511-1:2003. The changes from Edition 1 to Edition 2 were initiated by comments from National Committees representing a broad spectrum of users of the standard worldwide. In Edition 1:2003 (Ed. 1) 1 , the requirements addressing the avoidance and control of systematic errors that occur during design, engineering, operation, maintenance and modification were adapted primarily to support independent safety functions up to a SIL 3 performance target. In contrast, Edition 2:2016 (Ed. 2) needed to address a prevailing trend of sharing automation systems across multiple safety functions. Ed. 2 also needed to address the common misinterpretations of the Ed. 1 requirements that became evident to the IEC 61511 maintenance team (MT 61511) over the intervening years. For example, Ed. 2 reinforced
Scope: This part of IEC 61511, which is a Technical Report, specifies the rationale behind all clauses and the relationship between them, raises awareness for the most common misconceptions and misinterpretations of the clauses and the changes related to them, explains the differences between Ed. 1 and Ed. 2 of IEC 61511-1 and the reasons behind the changes, presents high level summaries of how to fulfil the requirements of the clauses, and explains differences in terminology between IEC 61508-4:2010 and IEC 61511-1 Ed. 2.
Contents:
- FOREWORD
- INTRODUCTION
- Scope