IEC TR 61869-102-2014 PDF

IEC TR 61869-102-2014 PDF

Instrument transformers-Part 102: Ferroresonance oscillations in substations with inductive voltage transformers

$211.22 $422.43 -50%
Product Code: IEC TR 61869-102
Stock In Stock
Edition: 1.0
Published: 01/2014
Number of Pages: 60
File Size: 1 file, 3 Bytes

Available Options

Product Description

Instrument transformers – Part 102: Ferroresonance oscillations in substations with inductive voltage transformers

Introduction: During the last twenty years ferroresonance oscillations in substations with inductive voltage transformers according to IEC 61869-3 or with combined transformers according to IEC 61869-4 were discussed in the international Cigré working groups and in IEEE committees in the US. The results were published in Cigré [1] technical report or IEEE [2] publications. The reasons for these publications were the more frequent occurrence of ferroresonance oscillations in substations. As a consequence of the price pressure on the operating authorities and the component manufacturers such as instrument transformers, power transformers and grading capacitors for high-performance circuit breakers have led to an increasingly higher exploitation of the system and components. This trend results in: a) the shift from normal rated voltage Upr in the direction of the maximum permitted highest voltage for equipment Um (IEC 60071-1 [3]); b) increasing the flux density B ˆ by reducing the cross-section of the core of the inductive voltage transformer; c) the reduction of the substation capacitance by using new components (e.g. MV and HV instrument transformers) leads to an increase of the excitation-voltage for the non-linear circuits; d) reduction of the actual burden in the substation by using digital meters and relays with burden of approximately 1 VA, while still specifying the high nominal burden (50 VA to 400 VA) for the inductive voltage transformer. However, even these higher burdens are oft

Scope: This part of IEC 61869 provides technical information for understanding the undesirable phenomenon of ferroresonance oscillations in medium voltage and high voltage networks in connection with inductive voltage transformers. Ferroresonance can cause considerable damage to voltage transformers and other equipment. Ferroresonance oscillations may also occur with other non-linear inductive components.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 61869-102-2014 PDF

IEC TR 61869-102-2014 PDF

$211.22 $422.43