Process management for avionics - Electronic components capability in operation - Part 2: Semiconductor microcircuit lifetime
Introduction: Electronic equipment for aerospace, defence and high performance (ADHP) applications integrates more and more commercial off the shelf (COTS) semiconductor microcircuits. These semiconductor microcircuits are above all designed and produced to address high volume and low cost markets such as consumer electronics, telecommunications or microcomputers, whose main requirements are basically cost, integration, performance and low consumption and for which the long term reliability in severe environments (for example vibration, thermal cycling, humidity and operating temperature) is not necessarily an imperative design criterion. With semiconductor transistor feature size decrease, mainly from 90 nm transistor feature size, wear-out can arise in COTS semiconductor microcircuits. For example, non-homothetic evolution of semiconductor microcircuit bias voltage and transistor feature size scaling have led to an increase of the electrical fields inside the semiconductor microcircuit and hence changes in classical failure and degradation modes or mechanisms. In addition new transistor architectures and technologies (for example fin field effect transistor (FinFET), fully depleted silicon on insulator (FD-SOI), etc.) and new materials (for example low-k dielectrics, high-k dielectrics, strain source/drain Si-Ge) have been introduced since the generation 90 nm, and particularly from 45 nm and below, to overcome the scaling issues, contributing potentially to the evolution of failure and
Scope: This part of IEC 62240, which is a Technical Report, focuses on original equipment manufacturers (OEMs) using commercial off the shelf (COTS) semiconductor microcircuits for high performance, high reliability and long duration applications. This document supports OEMs in the preparation and maintenance of their semiconductor electronic component management plan (ECMP). NOTE 1 OEMs are responsible for applications reliability performance that semiconductor microcircuit lifetime can affect; They are thus responsible for the compliance of the lifetime of the semiconductor microcircuits they use with the lifetime requirements of the microcircuits under the applications mission conditions. This document describes a process and a method for selecting digital semiconductor microcircuits by ensuring that their lifetime is compatible with the requirements of aerospace, defence and high performance (ADHP) applications (generally in connection with functional environments). Methods and guidelines are provided to assess the long-term reliability of COTS semiconductor microcircuits in such applications; they mainly apply during the electronic design phase when selecting semiconductor microcircuits and assessing the application reliability. Moreover, this document focuses on the intrinsic wear-out and the lifetime of COTS semiconductor microcircuits processed of less than or equal to 90 nm feature size (also called deep sub-micron (DSM) semiconductor microcircuits) and puts aside, at this time, packaging wear-out and random failure mechanisms. In this view, physics of failure (PoF) is at the heart of the approach. Indeed 90 nm process node was a bend for realizing that the semiconductor wear-out and lifetime was a concern for microcircuits processed with nodes from 90 nm and below with regard to aerospace, defence and high performance (ADHP) mission profile. Particularly from 45 nm and below, wear-out and lifetime remains a serious concern for long term ADHP missions. In addition, from 28 nm, scaling is no longer a classical technology shrink (case of planar technology for example) and different technological architectures of transistors are introduced (for example: fin field
Contents:
- FOREWORD
- INTRODUCTION
- Scope