IEC TR 62267-2-2011 PDF

IEC TR 62267-2-2011 PDF

Railway applications-Automated urban guided transport (AUGT)-Safety requirements-Part 2: Hazard analysis at top system level

$100.88 $201.76 -50%
Product Code: IEC TR 62267-2
Stock In Stock
Edition: 1.0
Published: 03/2011
Number of Pages: 26
File Size: 1 file, 327 Bytes

Available Options

Product Description

Railway applications – Automated urban guided transport (AUGT) – Safety requirements – Part 2: Hazard analysis at top system level

Introduction: This Technical Report publishes the hazard analysis at top system level conducted by members of working group 45 of IEC technical committee 9 in order to allocate possible safeguards able to compensate for the absence of a driver in the front cabin of the train or attendant staff from the train as mentioned in 4.2 of IEC 62267:2009. The hazard analysis is structured in accordance to basic functions of train operations following Table 1 of IEC 62267:2009 covering the basic hazards of train operations. The hazard analysis tabulates the identified hazards with their associated causes and triggers as well as providing an associated list of possible safeguards able to compensate the absence of operational staff from the front cabin of a train. The results of hazard analysis do not state the choice of safeguards or the acceptable level of residual risk which may vary depending on the local safety culture. The choice of a listed safeguard or combination of safeguards, or the choice not to use any safeguard to compensate or mitigate a specific hazard in a specific application depends on the risk tolerability which is to be assessed under the responsibility of the Transport Authority and Safety Regulatory Authority by a specific risk analysis. This technical report, therefore, does not judge whether a safeguard or a combination of safeguards is necessary. However, this technical report is intended to support Transport Authorities and Safety Regulatory Authorities in hazard identificat

Scope: This technical report provides a non normative generic hazard analysis at top system level conducted for the development of IEC 62267 for Automated Urban Guided Transport (AUGT) systems. This report is applicable to all systems covered by the scope of IEC 62267. This generic hazard analysis cannot be used for specific applications without taking into account the specific system environment and local safety culture. This generic hazard analysis can be used for specific AUGT systems to support the necessary activities in lifecycle process following IEC 62278 (RAMS).

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 62267-2-2011 PDF

IEC TR 62267-2-2011 PDF

$100.88 $201.76